GE MDS 05-4558A01 manual Configuration MenuFrequency Control. The following modes

Page 6

Other parameters commonly needing review or adjustment are:

•RF Output Power Level (AP Only)—Check and adjust as neces- sary for compliance with regulatory limits. (Default power is +30 dBm for 900 model, +20 dBm for 3650 model.) Note that Remotes “auto-adjust” power output based on target receive signal set at the Access Point.

•Password—Used for remote access and Menu System features.

•Frequency Mode (900 model only)—This is found under Radio

Configuration Menu>Frequency Control. The following modes

are available:

Single Channel—Where AP and Remote link up using one fre- quency channel of the 14 possible channels in the 900 Mhz band. This is the default frequency mode.

Static Hopping—Where an AP and Remote link up using FHSS based on a Hop Pattern.

Hopping with Hand-offs—(Used with Remotes only.) Based on AP locations file, which contains GPS coordinates to prede- termine or preselect which AP to hop with.

•Frequency (3650 model only)—Operating frequency in MHz.

•TDD Sync Mode (AP only)—Selections are: Free Run, Prefer

GPS, and GPS Required.

For single channel operation, the TDD Sync Mode can be set to Free Run or GPS Required. Using GPS Required synchronizes the AP’s transmissions to the GPS timing. When the frequency mode is Static Hopping the TDD Sync Mode must be set to GPS Required.

Free Run allows for rapid configuration in most systems. Note that Free Run only works on single channel frequency mode (the default mode).

GPS Required is only needed on the 3650 model to synchronize multiple Access Points.

NOTE: The default password for all units is admin. The default user- name is admin.

A unique IP address and subnet are required to access the Menu System, either through the LAN port, or remotely over-the-air.

A summary of selected operating parameters’ range and default values is included in the Installation Setup Chart at the center of this guide.

05-4558A01, Rev. C

MDS Mercury Series Startup Guide

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents MDS Mercury Series Contents Installation Overview Installation StepsProduct Description Install the Antenna Mount the TransceiverMeasure & Connect Primary Power Review the Transceiver’s ConfigurationConfiguration MenuFrequency Control. The following modes Repeat above steps for each unit in the network Connect the Data Equipment Check for Normal OperationResetting to Factory Defaults Use with Caution Aiming Directional AntennasMenu System Main MenuInstallation Reference Chart MGT System Menu Default VALUES/RANGEProcedure Transmitter Power & Antenna Test Troubleshooting Troubleshooting Using LEDsLink LED Troubleshooting with the Menu System Transmitter SpecificationsGeneral ReceiverProtocols Physical InterfaceApprovals ManagementTechnical Assistance GE MDS, LLC

MDS 05-4558A01 specifications

The GE MDS 05-4558A01 is a robust and versatile communication device designed primarily for industrial applications. This product is part of a larger line of GE MDS communication solutions that ensure reliable data transmission over various distances, making it a preferred choice for manufacturers and operators in sectors such as utilities, transportation, and various industrial settings.

One of the main features of the GE MDS 05-4558A01 is its ability to support multiple communication protocols. This adaptability allows integration into a variety of existing network setups, facilitating seamless connectivity and efficient data transfer. The device is equipped with advanced packet radio technology, which enhances its performance in noisy environments, a common challenge in industrial operations.

The GE MDS 05-4558A01 also boasts a high level of scalability. Users can easily expand their networks as their operational needs grow, ensuring that the communication infrastructure remains robust and future-proof. This scalability is crucial for industries that require both immediate and long-term data transmission solutions without significant reinvestment in new technologies.

In addition to its communication capabilities, the device features durable construction designed to withstand harsh environmental conditions. Its rugged design ensures reliability in extreme temperatures, humidity, and even exposure to dust and chemicals. This durability is coupled with a compact form factor, allowing for flexible installation in various locations and environments.

Another significant characteristic of the GE MDS 05-4558A01 is its low power consumption. Designed to operate efficiently, it minimizes energy usage while maintaining consistent performance. This feature is particularly important for remote installations where power resources may be limited.

The device also incorporates advanced security protocols to protect the integrity of transmitted data. By employing encryption techniques and secure authentication methods, the GE MDS 05-4558A01 ensures that sensitive information remains protected from unauthorized access.

Its user-friendly interface simplifies installation and management, enabling technicians to quickly configure and deploy the devices with minimal training. This ease of use is complemented by comprehensive technical support provided by GE, ensuring that users can maximize the performance of their communication infrastructure.

Overall, the GE MDS 05-4558A01 stands out for its integration of advanced technologies, robust features, and reliability, making it an exceptional choice for industries needing dependable and secure data communication solutions.
Top Page Image Contents