GE GFK-2193A user manual Adding a Profibus Slave Module to the Hardware Configuration

Page 14

Chapter

3

Configuration

These configuration procedures are intended for users with at least a basic knowledge of the CIMPLICITY Machine Edition Logic Developer software and the Series 90-30 PLC. For help with using the software, please see the software’s built-in help system.

Note: The PROFIBUS Slave is supported only in Machine Edition Logic Developer-PLC.

Adding a PROFIBUS Slave Module to the Hardware Configuration

Add the IC693PBS201 module to the PLC rack configuration.

1.In the Project tab of the Navigator, expand the Hardware Configuration folder.

2.In the Hardware Configuration folder, right click the PLC Slot where you wish to install the PROFIBUS Slave module. Note that a PROFIBUS module is not a valid choice for slot 1 of a modular CPU rack.

3.Select Add Module from the shortcut menu. The Module Catalog dialog box appears.

Note: To edit a module that already appears in the rack, right click the module and select Configure. The module’s Parameter Editor window opens.

4.Click the Communications tab. The Communications module list appears.

5.Select the IC693PBS201 PROFIBUS Slave and click the OK button. The module is added to the PLC configuration in the Navigator window, and the module’s Parameter Editor window appears in the InfoViewer window space.

GFK-2193A

3-1

Image 14

Contents GE Fanuc Automation Programmable Control ProductsAs Used in this Publication CimstarContents Contents Related Publications Overview and SpecificationsProfibus Information IC693PBS201 Slave Module Specifications KeyBus Communication Profibus BasicsProfibus Network Overview Network Topology Amount of Data Transmission Duration FrequencyNetwork Connectors Pin No Signal DesignationInstalling the Profibus Module in the PLC Rack InstallationReviewing System Power Requirements Baud Rate Line a Line B Glass Fiber Distance Max 1 Connecting the Slave to the Profibus Network Network Segment Length Profibus Cable Types Network TerminationNetwork Baud Rate Removing the Module from the RackConfiguration Adding a Profibus Slave Module to the Hardware ConfigurationConfiguring a Profibus Slave Module Settings TabInput Data Area Tab Profibus Slave Module’s Input Data Area ParametersPower Consumption Tab Output Data Area TabColor Indication Status and DiagnosticsProfibus Slave Module LED Indicators Word 1 Slave Status Word Network Parameter ErrorsStatus/Firmware ID Array Sysid Examples Communication RequestsCommreq Ladder Instruction Slot Word ValueOperation of the Communications Request PLCCommreq Programming Requirements and Recommendations Error Detection and HandlingCorrective Actions for Commreq Errors Commreq Status Word Value DescriptionGet Slave Status Commreq Get Slave Status Command Block Basic ExampleProfibus Slave Module Commreq Reference Memory TypesGet Slave Status Reply Data Format Bit Meaning ValueNetwork Parameter Errors Value Type Dec Hex Description Read Module Header Command Block Basic ExampleRead Module Header Read Module Header Reply Data Format for Slave Clear Counters Reply Data Format Clear Counters Command Block Basic ExampleClear Counters Index