GE 45614, 45609 manual Specifications

Page 13

SPECIFICATIONS

ZW4001

Power: 120 VAC, 60 Hz.

Signal (Frequency): 908.42 MHz.

Maximum Loads: 600W, incandescent, ½ HP Motor or 1800W (15A) Resistive

Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.

Operating Temperature Range: 32-104° F (0-40° C)

For indoor use only.

Specifications subject to change without notice due to continuing product improvement

Z-Wave is a registered US trademark of Zensys A/S

is a trademark of General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114

www.jascoproducts.com

13

Image 13

Contents On/Off Relay Switch and 3-Way Switch Kit Not for USE with Medical or Life Support Equipment IntroductionControlling Appliances Wireless RangeThings to consider regarding RF range Important Note about 3-WAY CircuitsSingle Switch Wiring Schematic InstallationWay Wiring Schematic using one 45609 and two 45610’s Way Wiring Schematic using one 45609 and oneSingle, Dual and Triple Gang Boxes Wire gauge requirements Observe Important Wiring InformationWire strip length Optional for 3 or 4-Way ControlKey Features Air Gap SwitchRemote Control Basic OperationAdvanced Operation Parameter No Length 1 Byte Valid Values = 0 or 1 defaultAll On/All Off LED LightRestoring Factory Defaults Invert SwitchWarranty Interoperability with Z-WaveDevicesCompliance with IC Rules and Regulations FCCSpecifications