QUICKSTART GUIDE
The following procedure describes how to connect a
ZInsert either end of the cable with an RJ45 plug into the RJ45 connector on the module.
Although the connector is shielded, either unshielded or shielded cables may be used.
ZConnect the other end of the cable to the corresponding device.
ZUse the LINK LED to ensure connectivity by noting that the LED will be illuminated when the unit is powered and connection is established.
6.6Connecting Gigabit Media using GBICs
The Gigabit ports accept
22 | MULTILINK ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE |