QUICKSTART GUIDE
The
The bracket mounting holes in the sides of the Unit permits it to be mounted in various ways. The same holes fit all three types (19", ETSI, 23") of brackets. The mounting for the 23" is illustrated above. The brackets may be attached flush with the front, or attached in the center for a
The optional 23" brackets and the ETSI (21") brackets each come as a pair in a package, along with the necessary screws for attaching the brackets to the sides of the Unit. They must be ordered as line items.
2.3 DIN-Rail / Panel Mounting - ML1600
The Unit is designed for use in a “factory floor” industrial environment. It is available with optional
754708A1.CDR
FIGURE 3: Unit with DIN-rail clips
The DIN rail latching clips are mounted on the upper rear corners of the unit. Two threaded holes are provided on the sides of Unit for
4 | MULTILINK ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE |