PANEL DESCRIPTIONS
1Power Indicator
This LED will become active once the included 5V DC power supply is properly connected between the unit and a open wall power receptacle.
2IR (Infrared) Receiver
This receiver will accept command for switching between input HDMI devices using the included
3Internal EDID Mode Indicator
This LED will become active when the unit is using the
4External EDID Mode Indicator
This LED will become active when the unit is using the EDID from the HDMI deice connected to HDMI output port 1. See page 6 for more details.
5Link Indicator
This LED will become active when the unit is properly connected to an HDMI capable device on either of the HDMI output ports.
6Input Indicators
There is one LED for each of the four input ports. The LED for the currently selected HDMI input will be active.
7S/PDIF Digital Audio Output Connector This S/PDIF output will supply supported external audio decoder or device such as
audio formats for output to an an amplifier or receiver.
8EDID Button
This button will toggle between the internal external EDID modes. To determine which mode is currently being used, please note which EDID mode LED is active on the front panel of the unit.
9Reset Button
This button will reset the unit and force all devices in the chain to
10HDMI Input Ports
Connect up to four (4)
11HDMI Output Ports
Connect up to two (2) HDTV displays to these HDMI output ports.
125V DC Power Receptacle
Connect the included 5V DC power supply between this port and an open wall power receptacle.
5