Gefen EXT-HDMI1.3-442 user manual Connecting and Operating 4X2 Switcher for Hdmi

Page 9

CONNECTING AND OPERATING

THE 4X2 SWITCHER FOR HDMI 1.3

How to Connect the 4x2 Switcher for HDMI 1.3

1.Connect up to two HDMI source devices to the 4x2 Switcher for HDMI 1.3 using the supplied HDMI cables.

2.Connect up to four HDMI capable devices to the 4x2 Switcher for HDMI 1.3 using the supplied HDMI cables.

3.Connect the included 5V DC power adapter to the 4x2 Switcher for HDMI 1.3 power input port.

4.Power on the displays ﬁrst and then the source.

Wiring Diagram for the Gefen 4x2 Switcher for HDMI 1.3

6

Image 9

Contents 4x2 Switcher for Hdmi Technical Support Asking for AssistanceTechnical Support Hours Write ToContents Introduction Gefen 4x2 Switcher for HdmiGefen How It WorksOperation Notes Features Hdmi 1.3 FeaturesFeatures Panel Layout Panel Descriptions Power IndicatorConnecting and Operating 4X2 Switcher for Hdmi How to Connect the 4x2 Switcher for HdmiWiring Diagram for the Gefen 4x2 Switcher for Hdmi IR Remote Description RMT-4IR Remote Control UnitInstalling the IR Remote Control Battery IR Remote InstallationSetting the IR Remote Channel on the RMT-8IR IR Remote ConfigurationSetting The IR Channel IR Channel ConfigurationEdid Management Edid Mode SelectionTiming Refresh Rate Audio Format Supported ChannelsFollowing Edid features are copied from Output External Edid ManagementDisplay Connections 5V DC SpecificationsProduct Registration WarrantyRev B3 Nordhoff St., Chatsworth CA