Gefen EXT-HDMI1.3-442 user manual IR Remote Installation, Installing the IR Remote Control Battery

Page 11

IR REMOTE INSTALLATION

1.Remove the battery cover on the back of the IR Remote Control unit.

2.Insert the included battery into the open battery slot. The positive (+) side of the battery should be facing up.

3.Replace the battery cover.

The Remote Control unit ships with two batteries. One battery is required for operation and the other battery is a spare.

Battery Compartment

Image 11

Contents 4x2 Switcher for Hdmi Write To Asking for AssistanceTechnical Support Technical Support HoursContents How It Works Gefen 4x2 Switcher for HdmiIntroduction GefenOperation Notes Features FeaturesHdmi 1.3 Features Panel Layout Panel Descriptions Power IndicatorWiring Diagram for the Gefen 4x2 Switcher for Hdmi Connecting and Operating 4X2 Switcher for HdmiHow to Connect the 4x2 Switcher for Hdmi IR Remote Description RMT-4IR Remote Control UnitInstalling the IR Remote Control Battery IR Remote InstallationSetting the IR Remote Channel on the RMT-8IR IR Remote ConfigurationSetting The IR Channel IR Channel ConfigurationAudio Format Supported Channels Edid Mode SelectionEdid Management Timing Refresh RateDisplay Connections Following Edid features are copied from OutputExternal Edid Management 5V DC SpecificationsProduct Registration WarrantyRev B3 Nordhoff St., Chatsworth CA