Sears 565.693 Installation, The oven requires an opening of, wx 17 h x 21 d for installation

INSTALLATION

Remove all packing material and accessories.

Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged.

1.Select a level surface that provides enough open space for the intake and/or outlet vents.

A minimum clearance of 3 inches (7.5 cm) is required between the oven and any adjacent wall. One side must be open.

•Leave a minimum clearance of 3 inches (7.5 cm) above the oven.

•Do not remove the legs from the bottom of the oven.

•Blocking the intake and/or outlet openings can damage the oven.

•Do not install oven over a range, cooktop or other heat-producing appliance.

2.Plug your oven into a standard 120-volt /60-Hz household outlet.

Be sure the electrical circuit is at least 15 amperes and that your microwave oven is the only appliance on the circuit.

27 inch Built-in Kit

Your oven can be built into a cabinet by using an optional built-in kit. Contact the store where you purchased your oven.

Model No. Built-in Kit Stock No.

56.5,_930020-69920

565.6930120-69921

565.6940020-69910

565.6940120-69911

•When using the built-in kit, a minimum clearance of 2 feet is

required between the oven and heat- producing appliance. For example, next to or above a conventional gas or electric range or above conventional wall oven. Leave a minimum clearance of 2 feet around the even. If installed near or over a hee-t,source, the oven could be

damaged and the warranty would be void.

•The oven requires an opening of 25"

(w)x 17" (h) x 21" (d) for installation.

NOTE: This unit is not designed for 50 Hz or any circuit other than a 120-volt/ 60-Hz AC circuit. This oven is designed for countertop or built-in installation.

9