Sears 565.69301, 565.69401 owner manual Kitchen Timer, Time Cooking

KITCHEN TIMER

You can use the Kitchen Timer function program is going on in the oven, Example: To set timer for 3 minutes:

StepProcedure Touch KITCHEN TIMER,

1

independently, even while a cooking

KeypadDisplay

KITCHEN_K

TIMERU

2

3

Touch 3, 0 and 0 to set 3 minutes.

(up to 99 minutes 99 seconds Touch START.

The timer starts counting and beeps sound for 7 seconds at

the end.

3	0	0	_l n_ K
			Lt U

START _,	i_aFt K
	LI LI

Note: • To check remaining timer time during cooking, touch KITCHEN TIMER. The remaining time appears in the display for 5 seconds.

•To clear a timer setting, touch STOP/CLEAR while the display shows remaining timer time.

•The indicator K flashes when the display shows a cooking time.

•The indicator K lights when the display shows a timer time.

•To stop beeps of Kitchen Timer, touch KITCHEN TIMER.

•Kitchen Timer will not beep if the oven beeps at the same time to indicate another oven operation (the end of a cooking, for example).

•If you do not enter a timer time for 10 seconds after step 1, the setting is cleared with a beep.

•If a cooking completes while you are setting the Kitchen Timer, all settings are cleared. Restart from step 1.

•If no key is touched for 5 seconds after the last key entry at step 2 above, the timer automatically starts.

TIME COOKING

This basic microwave cooking method allows you to cook food for a desired time. In addition to the P100 (maximum) power level, you can select different microwave power from 11 levels, P 0 to P100 (0-100% of total power level).

Manual Defrosting (Without using Auto Defrost feature):

Us_o_er level P 30. To speed up the defrosting of dense foods over 1 ib (450 g), you may start on P100 for 2 minutes, then reduce to the level P 30.

Delay Start Cooking:

Use power level P 0 for the first stage of multistage cooking. You can delay cooking start time by up to 99 minutes 99 seconds.

Multistage Cooking

You can program up to 3 stages of cooking in sequence. Each stage can be programmed with a different power and time setting. To program 2-stage or 3-stage cooking, repeat the Time Cooking steps 1 to 3 and touch START. The oven automatically proceeds to the end of cooking.

•When you cook on P100 power for 1-stage, you must enter POWER, 1 and 0. "t_u can not skip step 2, 3 when setting multistage cooking.

12