Gefen EXT-DPKVM-841 user manual IR Remote Control Unit, Layout and Description

Page 11

IR REMOTE CONTROL UNIT

Layout and Description

1

2

1Activity Indicator

This LED will be activated momentarily each time a button is pressed.

2Source Selection Buttons (1 - 8)

These buttons are used to select which source is routed to a monitor.

NOTE: An Activity Indictor that ﬂashes quickly while holding down any one of the eight buttons indicates a low battery. Replace the IR Remote Control battery as soon as possible.

8

Image 11

Contents 8x1 Dpkvm Switcher Write To Asking for AssistanceTechnical Support Technical Support HoursContents How It Works Gefen 8x1 Dpkvm SwitcherIntroduction GefenOperation Notes Package Includes FeaturesFeatures Front Panel Front Panel LayoutFront Panel Descriptions Input Indicators 1Back Panel Back Panel Layout5V DC Back Panel DescriptionsLayout and Description IR Remote Control UnitInstalling the Battery Corresponding DIP Switch Settings for each IR Channel Setting the IR ChannelWiring Diagram for the 8x1 Dpkvm Switcher Connecting the 8X1 Dpkvm SwitcherHow to Connect the 8x1 Dpkvm Switcher Switching sources using the IR Remote Control Operating the 8X1 Dpkvm SwitcherFront Panel Buttons and LED Indicators Switching sources using the front-panel buttonsSwitching sources using Telnet Switching sources using RS-232RS-232 Control Serial Port Settings#GETPASS Command RS-232 CommandsCommand Syntax #RSTIP Command #GETUSERNAME Command#IPCONFIG Command #SETTELNETPORT Command #SETHTTPPORT Command#SETPASS Command #SGATEWAY Command #SETUSERNAME Command#SNETMASK Command #SIPADD Command#ACTIVEBOLO Command #USETELNETPASS Command#IRRMTADD Command #FADEFAULT Function#STBYMODE Command #LOCKPOWER CommandCommand Routing CommandsCommand Description Gefen Telnet Control#sipadd New IP set to Firmware Update Procedure Firmware UpdateInstalling the Rack Ears Rack EAR InstallationSpecifications Product Registration WarrantyRev A3 Nordhoff St., Chatsworth CA