Gefen EXT-DPKVM-841 user manual #GETUSERNAME Command, #IPCONFIG Command, #RSTIP Command

Page 19

RS-232 COMMANDS

#GET_USER_NAME Command

The #GET_USER_NAME command prompts for the Telnet username.

Syntax:

#get_user_name

Parameters:

None

#IPCONFIG Command

The #IPCONFIG command displays all TCP/IP settings. Syntax:

#ipconﬁg

Parameters:

None

#RSTIP Command

The #RSTIP command resets the IP conﬁguration to the default settings. Syntax:

#rstip

Parameters:

None

16

Image 19

Contents 8x1 Dpkvm Switcher Write To Asking for AssistanceTechnical Support Technical Support HoursContents How It Works Gefen 8x1 Dpkvm SwitcherIntroduction GefenOperation Notes Features FeaturesPackage Includes Front Panel Front Panel LayoutFront Panel Descriptions Input Indicators 1Back Panel Back Panel Layout5V DC Back Panel DescriptionsLayout and Description IR Remote Control UnitInstalling the Battery Corresponding DIP Switch Settings for each IR Channel Setting the IR ChannelHow to Connect the 8x1 Dpkvm Switcher Connecting the 8X1 Dpkvm SwitcherWiring Diagram for the 8x1 Dpkvm Switcher Switching sources using the IR Remote Control Operating the 8X1 Dpkvm SwitcherFront Panel Buttons and LED Indicators Switching sources using the front-panel buttonsSwitching sources using Telnet Switching sources using RS-232RS-232 Control Serial Port SettingsCommand Syntax RS-232 Commands#GETPASS Command #IPCONFIG Command #GETUSERNAME Command#RSTIP Command #SETPASS Command #SETHTTPPORT Command#SETTELNETPORT Command #SGATEWAY Command #SETUSERNAME Command#SNETMASK Command #SIPADD Command#ACTIVEBOLO Command #USETELNETPASS Command#IRRMTADD Command #FADEFAULT Function#STBYMODE Command #LOCKPOWER CommandCommand Description Routing CommandsCommand Gefen Telnet Control#sipadd New IP set to Firmware Update Procedure Firmware UpdateInstalling the Rack Ears Rack EAR InstallationSpecifications Product Registration WarrantyRev A3 Nordhoff St., Chatsworth CA