Gefen EXT-DPKVM-841 user manual Firmware Update Procedure

Page 29

FIRMWARE UPDATE

Firmware Update Procedure

Any terminal emulation program can be used to perform the upgrade process. The instructions below is outlined for Windows® HyperTerminal.

1.Connect an RS-232 cable between the Switcher and the computer running the terminal program. Verify the correct serial port settings (see page 14).

2.Type the #activebolo command then press the [ENTER] key.

3.Repeat Step 2.

The following will be displayed on the screen:

================== Main Menu ========================

Download new program -------- 1 Cancel ---------------------- 2

=====================================================

4.Press [1] on the computer keyboard to begin downloading program to the htemporary memory.

5.The following message will be displayed:

Waiting for the ﬁle to be sent ... (press ‘a’ to abort)

6.In Hyperterminal, click Transfer > Send File...

7.Click Browse... and select the .bin ﬁle to be uploaded (e.g. 1x4splitter.bin).

8.Select the Ymodem protocol.

9.Click Send on the Send File dialog box.

10.After a few moments, a message will appear in Hyperterminal:

Programming Completed Successfully!

26

Image 29

Contents 8x1 Dpkvm Switcher Technical Support Asking for AssistanceTechnical Support Hours Write ToContents Introduction Gefen 8x1 Dpkvm SwitcherGefen How It WorksOperation Notes Package Includes FeaturesFeatures Front Panel Front Panel LayoutFront Panel Descriptions Input Indicators 1Back Panel Back Panel Layout5V DC Back Panel DescriptionsLayout and Description IR Remote Control UnitInstalling the Battery Corresponding DIP Switch Settings for each IR Channel Setting the IR ChannelWiring Diagram for the 8x1 Dpkvm Switcher Connecting the 8X1 Dpkvm SwitcherHow to Connect the 8x1 Dpkvm Switcher Front Panel Buttons and LED Indicators Operating the 8X1 Dpkvm SwitcherSwitching sources using the front-panel buttons Switching sources using the IR Remote ControlSwitching sources using Telnet Switching sources using RS-232RS-232 Control Serial Port Settings#GETPASS Command RS-232 CommandsCommand Syntax #RSTIP Command #GETUSERNAME Command#IPCONFIG Command #SETTELNETPORT Command #SETHTTPPORT Command#SETPASS Command #SGATEWAY Command #SETUSERNAME Command#SNETMASK Command #SIPADD Command#ACTIVEBOLO Command #USETELNETPASS Command#IRRMTADD Command #FADEFAULT Function#STBYMODE Command #LOCKPOWER CommandCommand Routing CommandsCommand Description Gefen Telnet Control#sipadd New IP set to Firmware Update Procedure Firmware UpdateInstalling the Rack Ears Rack EAR InstallationSpecifications Product Registration WarrantyRev A3 Nordhoff St., Chatsworth CA