Gefen EXT-DPKVM-841 user manual Operation Notes

Page 5

OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE 8X1 DPKVM SWITCHER

•The 8x1 DPKVM Switcher supports Pass-through EDID. The Switcher will use the EDID from the currently active input.

•Dual Link resolutions up to 2560 x 1600 are supported.

•HDCP content is not supported.

•This Switcher does not support DHCP.

•The default IR channel for both the Switcher and the IR Remote Control Unit is channel 0. See page 10 for more information.

2

Image 5

Contents 8x1 Dpkvm Switcher Technical Support Asking for AssistanceTechnical Support Hours Write ToContents Introduction Gefen 8x1 Dpkvm SwitcherGefen How It WorksOperation Notes Package Includes FeaturesFeatures Front Panel Front Panel LayoutFront Panel Descriptions Input Indicators 1Back Panel Back Panel Layout5V DC Back Panel DescriptionsLayout and Description IR Remote Control UnitInstalling the Battery Corresponding DIP Switch Settings for each IR Channel Setting the IR ChannelWiring Diagram for the 8x1 Dpkvm Switcher Connecting the 8X1 Dpkvm SwitcherHow to Connect the 8x1 Dpkvm Switcher Front Panel Buttons and LED Indicators Operating the 8X1 Dpkvm SwitcherSwitching sources using the front-panel buttons Switching sources using the IR Remote ControlSwitching sources using Telnet Switching sources using RS-232RS-232 Control Serial Port Settings#GETPASS Command RS-232 CommandsCommand Syntax #RSTIP Command #GETUSERNAME Command#IPCONFIG Command #SETTELNETPORT Command #SETHTTPPORT Command#SETPASS Command #SGATEWAY Command #SETUSERNAME Command#SNETMASK Command #SIPADD Command#ACTIVEBOLO Command #USETELNETPASS Command#IRRMTADD Command #FADEFAULT Function#STBYMODE Command #LOCKPOWER CommandCommand Routing CommandsCommand Description Gefen Telnet Control#sipadd New IP set to Firmware Update Procedure Firmware UpdateInstalling the Rack Ears Rack EAR InstallationSpecifications Product Registration WarrantyRev A3 Nordhoff St., Chatsworth CA