Gefen EXT-COMPAUD-CAT5-444 specification

4X4 COMPONENT AUDIO OVER CAT-5 RECEIVER

PANEL DESCRIPTION

1IR Receiver

This receiver will receive commands from both the included RMT-4IR remote control and from other commercial IR remote controls. IR commands from commercial IR remote controls are relayed from this unit back to the 4x4 Component Audio Over CAT-5 sending unit where they will be output by the attached IR Blasters.

2Selected Source LED

The currently selected source that is being displayed on the attached monitor will be visually acknowledged by an active LED. There are 4 LEDs, one for each source.

3Brightness & Focus Adjustment Trim Pots

Brightness and focus Trim Pots are available for ﬁne tuning the output video signal. Please see page 14 for more information and instructions on usage.

45V DV Power Input

Connect the included 5V DV power adapter to this input. Once a proper connection is made the power LED indicator should become active.

5Component Video Output

Connect the component display to this output using user supplied cables.

6CAT-5 Extension Port

Connect a user supplied CAT-5e cable between the CAT-5 extension ports on the 4x4 Component Audio Over CAT-5 sending unit and this port.

7Analog RCA Stereo Audio Output

Connect this output to either the display’s analog audio input or a receiver’s analog audio input using user supplied analog audio cables.

8Digital Coaxial Audio output

Connect this output to either the display’s digital coaxial audio input or a receiver’s digital coaxial audio input using a user supplied digital coaxial audio cable.

9Digital Optical Audio output

Connect this output to either the display’s digital optical audio input or a receiver’s digital optical audio input using a user supplied digital optical audio cable.

10IR Extension Port

Connect the optional IR Receiver Extension (part# EXT-RMT-EXTIR) to this port.

11Direct Select Buttons

Use buttons 1 through 4 to select what source the connected display will be view.