Eizo T960 user manual Connecting two PCs to the monitor, Selecting the active input, Example

Horizontal Scan	Maximum Vertical Refresh rate (Hz)
Frequency (kHz)
	640x480	800x600	1024x768	1280x1024	1600x1200	1600x1280
30-115	160	160	142	107	92	86

Connecting two PCs to the monitor

1)Be sure that the monitor and the PC are both switched off before connecting them.

2)Connect one PC to the monitor’s D-Sub connector and another to the BNC connector securely. The BNC connection should be made with an EIZO BNC cable, available as an option. Contact EIZO dealers for information about optional cables.

(Example)

E

MD-C53A (optional)

Selecting the active input

The BNC/D-Sub selection button on the front panel can be used to select either BNC or D-Sub connection as the active input.

The ScreenManager’s “Input Priority” setting (in the “Others” menu) can be used to set up the automatic selection of the input.

See page 35 for details.

1 INSTALLATION 15