Uniformity
“Uniformity” function adjusts the bright/white uniformity of the screen influenced by the earth magnetism or other environmental factors. There are two adjustment modes in the “Uniformity” function; “Standard” and “Custom”. If some color patches remain in the corners after the standard adjustment (selection of the best uniformity point), use the “Custom” for finer adjustments.
Standard
1)Select the “Uniformity” function. At “Standard”, the icons, N, NE, E, SE, S, SW, W, and NW represent a broad direction the screen is facing. Select the direction the screen is facing until the imbalance of brightness/whiteness over the entire screen will be minimized. Default setting is “no gauss”. Press enter as you finish.
2)To register the adjustment, select the “Save” icon and then press the ENTER key. If the settings are not saved, all adjustments will be lost.
•Choosing the direction at the “Standard” adjustment may not offer its best uniformity because of other environmental effects.
22 2 ADJUSTMENTS & SETTINGS USING THE SCREENMANAGER