Eizo T960 user manual Problems

	Problems	Points to check with possible solutions
5) The image has a background		Try adjusting the convergence in the
shadow.		ScreenManager’s Screen menu.
		See page 24.
		This problem can occur when using BNC
		connection and the termination switch is set
		incorrectly. The termination switch should be set
		to 75 Ω for a connection to a single monitor. See
		page 11.
6) The characters and images		Change the mode of “Signal Filter 1” function in
have a slight shadow on their		the ScreenManager “Others” menu. See page 37.
right side.		This may be solved by changing the refresh rate.

7) The characters and images	Decrease the vertical bars at the “Signal Filter 2”
have several vertical bars on	function in the ScreenManager “Others” menu.
their right side.	See page 37.

8) Moiré patterns are		Go to the ScreenManager’s “Screen” menu.
	distracting.	Switch on the moiré reduction feature and adjust
		as necessary. See page 24.
		Change the horizontal and vertical dimensions of
		the display area.
		Change the selected desktop or wallpaper pattern
		to any solid color pattern. For detailed
		information on how to change these patterns, refer
		to the documentation for the PC and operating
		system.
9) The image is flickering.		Flicker will occur with interlaced scanning, or
		non-interlaced scanning with a low refresh rate.
		All EIZO monitors are capable of reproducing
		high refresh rates for non-interlaced scanning. If a
		problem occurs when using a non-interlaced
		signal, try adjusting the graphics board to increase
		the refresh rate (if possible). Refer to the graphics
		board manual for information.

E

4 TROUBLESHOOTING 47