3. Screen Adjustment and Settings
3 Perform the auto size adjustment again with the analog screen adjustment pattern displayed.
1.Display Pattern 1 in full screen on the monitor using the “Screen Adjustment Utility” or the screen adjustment pattern files.
2.Press 
.
A message “Your setting will be lost, if you press again now” appears for five seconds.
3.Press 
again while the message is displayed.
The Auto Adjustment function begins (showing a running status icon) to adjust flickering, screen position, and screen size automatically.
4 Adjust by using <Screen> menu in the Adjustment menu
(1)Vertical bars appear on the screen
Use the <Clock> adjustment.
Select the <Clock> and eliminate the vertical bars by using 
and 
of the Control buttons. Do not continuously press the Control buttons, as the adjustment value will change quickly and make it difficult to locate the most suitable adjustment point. If the horizontal flickering, blur or bars appear, proceed to <Phase> adjustment as follows.
(2)Horizontal flickering, blurring or bars appear on the screen.
Use the <Phase> adjustment.
Select the <Phase> and eliminate the horizontal flickering, blurring or bars by using 
and 
buttons.
Note
•Horizontal bars may not completely disappear from the screen depending on the PC.
14