Eizo CG222W manual Off Timer, Locking the settings, How to lock, How to unlock

Page 20

3. Screen Adjustment and Settings

3-5. Off Timer

The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed. This function was created to reduce Afterimage characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use.

[Procedure]

1.Select <Off Timer> in the Adjustment menu <Others> menu.

2.Select "Enable and touch the Right and Left directing switches to adjust the operating time (1 to 23 hours).

[Off Timer System]

PC

Monitor

Power Indicator

Operating time (1H - 23H)

Operation

Blue

Last 15 min. in operating time

Advance Notice *1

Blue Flashing

Operating time expired

Power Off

Off

*1 When is pressed during the advance notice period, the monitor continues to operate for additional 90 minutes. Extension of operation time can be set without limitation.

[Power Resumption Procedure]

Press to return a normal screen.

Note

The off timer function works while the PowerManager is active, but there is no advance notice before the monitor's power is turned off.

3-6. Locking the settings

Use the "Adjustment Lock" function to prevent any accidental changes.

Buttons that can be locked (Enter button) / Adjustments/settings using

(Mode button)

(Auto Adjustment button)

+ EIZO Logo display setup (P. 23)

Buttons that cannot be locked (Input Signal Selection button)

(Power button)

(Adjustment Lock button)

[How to lock]

Hold down for 2 seconds or more. The power indicator lights orange for 1 second, and the settings are locked.

[How to unlock]

Hold down for 2 seconds or more. The power indicator lights orange for 1 second, and the settings are unlocked.

20

Image 20
Contents How to Setup Safety Symbols Page Cleaning To use the monitor comfortablyLCD Panel CabinetFeatures IntroductionButtons and Indicators Indicator status Operation statusTo use ColorNavigator Disk contents and software overviewUtility Disk Connection examples Connecting Two PCs to the MonitorSelecting input signal Priority setting Performance Required system environment Connecting to the USB HUBMaking Use of USB Universal Serial Bus Screen Adjustment and Settings Basic Operation and FunctionsFunctions Main menu Sub menu ReferenceScreen Adjustment Adjustment ProcedureAnalog Input WindowsAdjust by using Screen menu in the Adjustment menu Adjust the output signal range Dynamic Range of the signal Color Adjustment Simple adjustment FineContrast modeTo select FineContrast mode FineContrast ModeAdvanced Adjustments Adjustment menu Icons Functions FineContrast Mode Custom SRGBAdjustment Contents Power-save Setup ProcedurePower Saving System Power Resumption ProcedureOff Timer Locking the settingsHow to lock How to unlockPower Indicator Setting Automatic brightness adjustmentDisplaying Lower Resolutions Mode FunctionSetting the orientation of the Adjustment menu Eizo Logo Appearing FunctionTo undisplay To displayTroubleshooting Problems Possible cause and remedyTheir right side Signal Filter Boards Setup Procedure Attaching an armSpecifications USBDefault settings Beeper settingsDimensions Uinit mm inchPin Assignment DVI-I Connector Pin No SignalUSB Port RemarksGlossary Resolution TemperatureTmds Transition Minimized Differential Signaling SRGB Standard RGBAPPENDIX/ANHANG/ANNEXE For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie
Related manuals
Manual 8 pages 18.31 Kb