Eizo CG222W manual Power Indicator Setting, Automatic brightness adjustment

Page 21

3. Screen Adjustment and Settings

3-7. Power Indicator Setting

Light off the power indicator. This function is available for the multiple panels settings.

[Procedure]

1.Select <Power Indicator> in the Adjustment menu <Others> menu.

2.Select "Disable".

3-8. Automatic brightness adjustment

The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably.

[Procedure]

1.Select <BrightRegulator> in the Adjustment menu <Others> menu.

2.Select "Enable".

Note

•This function is not available in the EMU and CAL modes.

21

Image 21

Contents How to Setup Safety Symbols Page To use the monitor comfortably CleaningLCD Panel CabinetIntroduction FeaturesIndicator status Operation status Buttons and IndicatorsDisk contents and software overview Utility DiskTo use ColorNavigator Connecting Two PCs to the Monitor Selecting input signalConnection examples Priority setting Performance Connecting to the USB HUB Making Use of USB Universal Serial BusRequired system environment Basic Operation and Functions Screen Adjustment and SettingsMain menu Sub menu Reference FunctionsAdjustment Procedure Screen AdjustmentAnalog Input WindowsAdjust by using Screen menu in the Adjustment menu Adjust the output signal range Dynamic Range of the signal Simple adjustment FineContrast mode Color AdjustmentTo select FineContrast mode FineContrast ModeIcons Functions FineContrast Mode Custom SRGB Advanced Adjustments Adjustment menuAdjustment Contents Procedure Power-save SetupPower Saving System Power Resumption ProcedureLocking the settings Off TimerHow to lock How to unlockAutomatic brightness adjustment Power Indicator SettingMode Function Displaying Lower ResolutionsEizo Logo Appearing Function Setting the orientation of the Adjustment menuTo undisplay To displayProblems Possible cause and remedy TroubleshootingTheir right side Signal Filter Boards Attaching an arm Setup ProcedureUSB SpecificationsBeeper settings Default settingsUinit mm inch DimensionsPin No Signal Pin Assignment DVI-I ConnectorUSB Port RemarksGlossary Temperature ResolutionTmds Transition Minimized Differential Signaling SRGB Standard RGBAPPENDIX/ANHANG/ANNEXE For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie

Related manuals

Manual 8 pages 18.31 Kb