Eizo CG222W manual Default settings, Beeper settings

Page 29

5. Reference

Default settings

Brightness		33%
Smoothing		3
Temperature		5000K
FineContrast Mode		Custom
PowerManager		Analog input : VESA DPMS
		Digital input:DVI DMPM
Screen Size		Full
Input Priority		1
Off Timer		Disable
Menu Settings	Menu Size	Normal
	Menu Off Timer	45 sec
BrightRegulator		Disable
Beep		On
Language		English

Beeper settings

Short beep	Adjustment menu item selsected.
	Adjustment menu parameter adjusted to minimum or maximum limit.
	pressed
	When locked or unlocked with
Long beep	pressed
	Adjustment menu data-save executed.
4 short beeps	Monitor not connected correctly.
	PC turned off.
	Monitor received unsupported signal frequency.
2 short beeps every 15 sec.	Monitor is in the advance notice mode of the Off Timer.

The power will be off within fifteen minutes.

29

Image 29

Contents How to Setup Safety Symbols Page To use the monitor comfortably CleaningLCD Panel CabinetIntroduction FeaturesIndicator status Operation status Buttons and IndicatorsTo use ColorNavigator Disk contents and software overviewUtility Disk Connection examples Connecting Two PCs to the MonitorSelecting input signal Priority setting Performance Required system environment Connecting to the USB HUBMaking Use of USB Universal Serial Bus Basic Operation and Functions Screen Adjustment and SettingsMain menu Sub menu Reference FunctionsAdjustment Procedure Screen AdjustmentAnalog Input WindowsAdjust by using Screen menu in the Adjustment menu Adjust the output signal range Dynamic Range of the signal Simple adjustment FineContrast mode Color AdjustmentTo select FineContrast mode FineContrast ModeIcons Functions FineContrast Mode Custom SRGB Advanced Adjustments Adjustment menuAdjustment Contents Procedure Power-save SetupPower Saving System Power Resumption ProcedureLocking the settings Off TimerHow to lock How to unlockAutomatic brightness adjustment Power Indicator SettingMode Function Displaying Lower ResolutionsEizo Logo Appearing Function Setting the orientation of the Adjustment menuTo undisplay To displayProblems Possible cause and remedy TroubleshootingTheir right side Signal Filter Boards Attaching an arm Setup ProcedureUSB SpecificationsBeeper settings Default settingsUinit mm inch DimensionsPin No Signal Pin Assignment DVI-I ConnectorUSB Port RemarksGlossary Temperature ResolutionTmds Transition Minimized Differential Signaling SRGB Standard RGBAPPENDIX/ANHANG/ANNEXE For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie

Related manuals

Manual 8 pages 18.31 Kb