Eizo CG223W, CG243W Setting Language Language, Setting Range of Frequency Signal Bandwidth

Page 27

3-5. Setting Language [Language]

This function allows you to select a language for the adjustment menu or displaying message.

Selectable languages

English/German/French/Spanish/Italian/Swedish/Japanese /Simplified Chinese/Traditional Chinese

Procedure

1.Choose <Menu Settings> menu from the Adjustment menu, and press .

2.Choose <Language> from the <Menu Settings> menu, and press .

3.Choose a language with or .

4.Press to exit the adjustment.

3-6. Setting Range of Frequency [Signal Bandwidth]

Depending upon your operating environment, it may be necessary to set the frequency that corresponds to your graphics board. If you install it for the first time or change environment, set the monitor.

NOTE

•Refer to the manual of the graphics board.

•These environment described below can be set regardless of whether or not the computer is running.

•Only digital input signals can be set up.

Procedure

1.Press to turn off the monitor.

2.Press holding down at least 2 seconds to turn on the monitor.

The Optional Settings menu appears.

3.Choose <Signal Baldwidth> from the <Optional Settings> menu, and press . Select “Normal” or “Wide” with or , and press .

Use or to select (or just confirm) the frequency that corresponds to your graphics board.

CG223W

Setting

Horizontal scanning frequency (kHz)

Vertical scanning frequency (Hz)

Normal

31 - 65

59 - 61

Wide

31 - 65

47.5 - 61

CG243W

Setting

Horizontal scanning frequency (kHz)

Vertical scanning frequency (Hz)

Normal

26 - 78

59 - 61

Wide-1

26 - 78

23.75 - 63

Wide-2/-3 *

Used when inputting a special signal.

*：Wide-2/-3 cannot be selected when using DisplayPort.

4.Select “Finish” with or .

5.Press to exit the Optional Settings. The Optional Settings menu is closed.

Chapter 3 Setting Monitor 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Page Location of Caution Statement Page Cleaning Contents Introduction FeaturesControls and Functions Ex. CG243W Height adjustable standDisk contents and software overview Utility DiskTo use ColorNavigator Exiting Displaying Adjustment MenuAdjusting/Setting Basic Operation and FunctionsShowing Button Guide Functions Setting Screen Resolution Adjusting ScreenMac OS WindowsWindows Vista Windows XPDisplaying Screen Correctly Adjustment Procedure Perform the auto adjustmentWindows Remove flickering or blurring Phase To eliminate vertical bars ClockTo correct screen position Hor.Position Ver.Position To adjust color gradation automatically Range Adjustment Adjust the color gradationColor Adjustment To select the display mode Color ModeMode Purpose To perform advanced adjustments Adjustment items in each modeColor Mode Icon Function To adjust the brightness Brightness To adjust the contrast ContrastTo adjust the color temperature Temperature To adjust the gamma value Gamma To adjust the hue HueTo adjust the color saturation Saturation To adjust the gain value Gain To adjust the black level Black LevelTo enhance the outline of the image Outline Enhancer To adjust six colors 6 Colors Menu Function Displaying Lower ResolutionsConfiguring moving image performance Overdrive CG243W To change screen size Screen SizeEnabling/Disabling Mode Selection Mode Preset Settings Buttons that can be lockedLocking Buttons Key Lock Setting Orientation Orientation Setting the Eizo Logo Display LogoSetting Language Language Setting Range of Frequency Signal BandwidthSelectable languages To reset color adjustment values Color Reset Restoring the Default SettingSetting the Power Saving Power Save Signal inputs StandardMonitor Power Indicator Setting Power Indicator Power Indicator Problems Possible cause and remedy No picture Message below appearsScreen is too bright or too dark Auto adjust function does not work correctly Problems Possible cause and remedy Characters are blurredAdjustment menu does not appear Mode menu does not appearCheck whether the USB cable is connected correctly Attach the monitor to the arm or stand Attaching an ArmConnecting More than Two PCs to the Monitor To switch the input signalConnection examples Priority setting Function To set input signal selection Input SelectionConnection Procedure Setup of USB Function Making Use of USB Universal Serial BusRequired System Environment Displaying monitor information Monitor Info Displaying signal information Signal InfoDisplaying Monitor Information Displaying monitor information by pressingCG223W SpecificationsCG243W Main default settings factory settings Outside Dimensions CG243W FlexStand Contact No Signal Remarks Connector Pin AssignmentPin Signal Pin No SignalGlossary Resolution Hdcp High-bandwidth Digital Contents ProtectionPhase Range AdjustmentPreset Timing Applicable Frequency Polarity ResolutionDot clock Horizontal Vertical Signal MHz KHz For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie 关于电子信息产品污染控制标识 03V22843E1 U.M-CG243W

CG243W, CG223W specifications

The Eizo CG223W and CG243W are part of Eizo's ColorEdge series, designed specifically for creative professionals requiring precision in color reproduction. These monitors are particularly favored by graphic designers, photographers, and video editors.

The CG223W features a 22-inch, wide-gamut IPS panel, while the CG243W offers a larger 24-inch display. Both models are equipped with a maximum resolution of 1920 x 1200 pixels, providing ample screen real estate for detailed work. They boast a contrast ratio of 1000:1 and a brightness level that can reach up to 300 cd/m², ensuring that images are vibrant and details remain sharp, even in moderately lit environments.

One of the standout features of these monitors is their ability to cover a wide color gamut. The CG223W and CG243W can reproduce 99% of the AdobeRGB color space, which is a critical factor for professionals who need to ensure accurate color representation in their projects. This capability is complemented by Eizo's Quick Color Match technology, which facilitates color calibration across devices for consistent results.

Another important technology integrated into these monitors is the Eizo ColorNavigator software, which allows users to create and manage multiple color profiles. This is especially vital for workflows that require precise color fidelity for different devices and mediums. The built-in calibration sensor in both models enables users to perform self-calibrations, ensuring that color accuracy is maintained over time without the need for external equipment.

Furthermore, the ergonomic design of the CG223W and CG243W promotes comfort during long hours of work. They offer adjustable stands that allow for height, tilt, and swivel adjustments. This flexibility helps in creating an optimal viewing position, reducing strain during extended use.

Connectivity options are abundant, with USB hubs and multiple inputs, including DisplayPort and HDMI. This versatility allows users to connect the monitors to various devices quickly and efficiently.

With their blend of advanced technologies, comprehensive color reproduction capabilities, and ergonomic design, the Eizo CG223W and CG243W remain favorites among professionals who demand the highest standards in their visual work.
Top Page Image Contents