Eizo CG223W, CG243W user manual

Page 3

Notice for this monitor

Aside from general purposes like creating documents, viewing multimedia content, this product is also suited to applications such as graphics creation and digital photo processing, where accurate color reproduction is a priority.

This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications.

This product may not be covered by warranty for uses other than those described in this manual.

The specifications noted in this manual are only applicable when the following are used:

·Power cords provided with the product

·Signal cables specified by us

Only use optional products manufactured or specified by us with this product.

As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more after the monitor power has been turned on.

Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a stable display.

When the screen image is changed after displaying the same image for extended periods of time, an afterimage may appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (Refer to “Cleaning” on the next page).

The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.

The backlight of the LCD panel has a fixed lifetime. When the screen becomes dark or begins to flicker, please contact your dealer.

Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If the pressure marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)

Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until the dew condensation disappears, otherwise it may cause some damage to the monitor.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Page Location of Caution Statement Page Cleaning Contents Introduction FeaturesControls and Functions Ex. CG243W Height adjustable standDisk contents and software overview Utility DiskTo use ColorNavigator Exiting Displaying Adjustment MenuAdjusting/Setting Basic Operation and FunctionsShowing Button Guide Functions Setting Screen Resolution Adjusting ScreenMac OS WindowsWindows Vista Windows XPDisplaying Screen Correctly Adjustment Procedure Perform the auto adjustmentWindows Remove flickering or blurring Phase To eliminate vertical bars ClockTo correct screen position Hor.Position Ver.Position To adjust color gradation automatically Range Adjustment Adjust the color gradationColor Adjustment To select the display mode Color ModeMode Purpose To perform advanced adjustments Adjustment items in each modeColor Mode Icon Function To adjust the brightness Brightness To adjust the contrast ContrastTo adjust the color temperature Temperature To adjust the gamma value Gamma To adjust the hue HueTo adjust the color saturation Saturation To adjust the gain value Gain To adjust the black level Black LevelTo enhance the outline of the image Outline Enhancer To adjust six colors 6 Colors Menu Function Displaying Lower ResolutionsConfiguring moving image performance Overdrive CG243W To change screen size Screen SizeEnabling/Disabling Mode Selection Mode Preset Settings Buttons that can be lockedLocking Buttons Key Lock Setting Orientation Orientation Setting the Eizo Logo Display LogoSetting Language Language Setting Range of Frequency Signal BandwidthSelectable languages To reset color adjustment values Color Reset Restoring the Default SettingSetting the Power Saving Power Save Signal inputs StandardMonitor Power Indicator Setting Power Indicator Power Indicator Problems Possible cause and remedy No picture Message below appearsScreen is too bright or too dark Auto adjust function does not work correctly Problems Possible cause and remedy Characters are blurredAdjustment menu does not appear Mode menu does not appearCheck whether the USB cable is connected correctly Attach the monitor to the arm or stand Attaching an ArmConnecting More than Two PCs to the Monitor To switch the input signalConnection examples Priority setting Function To set input signal selection Input SelectionConnection Procedure Setup of USB Function Making Use of USB Universal Serial BusRequired System Environment Displaying monitor information Monitor Info Displaying signal information Signal InfoDisplaying Monitor Information Displaying monitor information by pressingCG223W SpecificationsCG243W Main default settings factory settings Outside Dimensions CG243W FlexStand Contact No Signal Remarks Connector Pin AssignmentPin Signal Pin No SignalGlossary Resolution Hdcp High-bandwidth Digital Contents ProtectionPhase Range AdjustmentPreset Timing Applicable Frequency Polarity ResolutionDot clock Horizontal Vertical Signal MHz KHz For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie 关于电子信息产品污染控制标识 03V22843E1 U.M-CG243W

CG243W, CG223W specifications

The Eizo CG223W and CG243W are part of Eizo's ColorEdge series, designed specifically for creative professionals requiring precision in color reproduction. These monitors are particularly favored by graphic designers, photographers, and video editors.

The CG223W features a 22-inch, wide-gamut IPS panel, while the CG243W offers a larger 24-inch display. Both models are equipped with a maximum resolution of 1920 x 1200 pixels, providing ample screen real estate for detailed work. They boast a contrast ratio of 1000:1 and a brightness level that can reach up to 300 cd/m², ensuring that images are vibrant and details remain sharp, even in moderately lit environments.

One of the standout features of these monitors is their ability to cover a wide color gamut. The CG223W and CG243W can reproduce 99% of the AdobeRGB color space, which is a critical factor for professionals who need to ensure accurate color representation in their projects. This capability is complemented by Eizo's Quick Color Match technology, which facilitates color calibration across devices for consistent results.

Another important technology integrated into these monitors is the Eizo ColorNavigator software, which allows users to create and manage multiple color profiles. This is especially vital for workflows that require precise color fidelity for different devices and mediums. The built-in calibration sensor in both models enables users to perform self-calibrations, ensuring that color accuracy is maintained over time without the need for external equipment.

Furthermore, the ergonomic design of the CG223W and CG243W promotes comfort during long hours of work. They offer adjustable stands that allow for height, tilt, and swivel adjustments. This flexibility helps in creating an optimal viewing position, reducing strain during extended use.

Connectivity options are abundant, with USB hubs and multiple inputs, including DisplayPort and HDMI. This versatility allows users to connect the monitors to various devices quickly and efficiently.

With their blend of advanced technologies, comprehensive color reproduction capabilities, and ergonomic design, the Eizo CG223W and CG243W remain favorites among professionals who demand the highest standards in their visual work.
Top Page Image Contents