Eizo CG243W, CG223W user manual Introduction, Features

Page 6

Chapter 1 Introduction

Thank you very much for choosing an EIZO Color Monitor.

1-1. Features

•22” wide format LCD (CG223W) / 24” wide format LCD (CG243W)

•Wide color gamut of 95% of Adobe RGB (CG223W) / 98% (CG243W)

•Applicable to the resolution of 1680 dots x 1050 lines (CG223W) / 1920 dots x 1200 lines (CG243W)

•HDCP (High-bandwidth Digital Content Protection)

•Frame Synchronous mode supported : 47.5 - 61Hz (CG223W)

:23.75 - 30.5Hz, 47.5 - 61Hz (CG243W)

•Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)

•3 signal input terminals (DVI-I x 2, DisplayPort x 1)

•Color Mode function reproduces color gamut and gamma compliant with [EBU/REC.709/SMPTE-C] broadcasting standards as well as the [DCI] digital cinema standard

“2-3. To select the display mode (Color Mode)” (page 18)

•Attaching the “Adjustment Certificate” to describe the grayscale and uniformity characteristics of the monitor individually

•Portrait/Landscape display available (rotate 90 degrees clockwise)

•Monitor hood attached

•The provided “ColorNavigator” calibration software enables you to calibrate monitor characteristics and generate color profiles

“1-3. Utility Disk” (page 8)

•Color Vision Deficiency Simulation Software "UniColor Pro" supported

This software can be downloaded from http://www.eizo.com

• Power saving function

This product is equipped with power saving function.

-- Power Consumption when main power switch is Off: 0W

Equipped with main power switch.

Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not used.

-- Auto EcoView function

The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably.

Excessively high brightness may lead a damage to the natural environment as well as to your eyes. Suppressing the excessively high brightness will be helpful to reduce the power consumption and the damage to your eyes.

“4-3. Setting Monitor’s Automatic Brightness Adjustment” (page 30)

NOTE

•This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of the Adjustment menu when using the monitor screen in vertical display position. (Refer to “To set the orientation of the Adjustment menu [Orientation]” on page 26.)

•For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When using the monitor with “Portrait” position, the setting needs to be changed depending on the graphics board used in your PC. Refer to the manual of the graphics board for details.

6

Chapter 1 Introduction

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Page Location of Caution Statement Page Cleaning Contents Features IntroductionEx. CG243W Height adjustable stand Controls and FunctionsDisk contents and software overview Utility DiskTo use ColorNavigator Basic Operation and Functions Displaying Adjustment MenuAdjusting/Setting ExitingShowing Button Guide Functions Adjusting Screen Setting Screen ResolutionWindows XP WindowsWindows Vista Mac OSAdjustment Procedure Perform the auto adjustment Displaying Screen CorrectlyWindows Remove flickering or blurring Phase To eliminate vertical bars ClockTo correct screen position Hor.Position Ver.Position Adjust the color gradation To adjust color gradation automatically Range AdjustmentColor Adjustment To select the display mode Color ModeMode Purpose To perform advanced adjustments Adjustment items in each modeColor Mode Icon Function To adjust the brightness Brightness To adjust the contrast ContrastTo adjust the color temperature Temperature To adjust the gamma value Gamma To adjust the hue HueTo adjust the color saturation Saturation To adjust the gain value Gain To adjust the black level Black LevelTo enhance the outline of the image Outline Enhancer To adjust six colors 6 Colors To change screen size Screen Size Displaying Lower ResolutionsConfiguring moving image performance Overdrive CG243W Menu FunctionEnabling/Disabling Mode Selection Mode Preset Settings Buttons that can be lockedLocking Buttons Key Lock Setting the Eizo Logo Display Logo Setting Orientation OrientationSetting Language Language Setting Range of Frequency Signal BandwidthSelectable languages Restoring the Default Setting To reset color adjustment values Color ResetSetting the Power Saving Power Save Signal inputs StandardMonitor Power Indicator Setting Power Indicator Power Indicator Problems Possible cause and remedy No picture Message below appearsScreen is too bright or too dark Mode menu does not appear Problems Possible cause and remedy Characters are blurredAdjustment menu does not appear Auto adjust function does not work correctlyCheck whether the USB cable is connected correctly Attaching an Arm Attach the monitor to the arm or standConnecting More than Two PCs to the Monitor To switch the input signalConnection examples To set input signal selection Input Selection Priority setting FunctionConnection Procedure Setup of USB Function Making Use of USB Universal Serial BusRequired System Environment Displaying monitor information by pressing Displaying signal information Signal InfoDisplaying Monitor Information Displaying monitor information Monitor InfoSpecifications CG223WCG243W Main default settings factory settings Outside Dimensions CG243W FlexStand Pin No Signal Connector Pin AssignmentPin Signal Contact No Signal RemarksGlossary Range Adjustment Hdcp High-bandwidth Digital Contents ProtectionPhase ResolutionPreset Timing Applicable Frequency Polarity ResolutionDot clock Horizontal Vertical Signal MHz KHz For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie 关于电子信息产品污染控制标识 03V22843E1 U.M-CG243W

CG243W, CG223W specifications

The Eizo CG223W and CG243W are part of Eizo's ColorEdge series, designed specifically for creative professionals requiring precision in color reproduction. These monitors are particularly favored by graphic designers, photographers, and video editors.

The CG223W features a 22-inch, wide-gamut IPS panel, while the CG243W offers a larger 24-inch display. Both models are equipped with a maximum resolution of 1920 x 1200 pixels, providing ample screen real estate for detailed work. They boast a contrast ratio of 1000:1 and a brightness level that can reach up to 300 cd/m², ensuring that images are vibrant and details remain sharp, even in moderately lit environments.

One of the standout features of these monitors is their ability to cover a wide color gamut. The CG223W and CG243W can reproduce 99% of the AdobeRGB color space, which is a critical factor for professionals who need to ensure accurate color representation in their projects. This capability is complemented by Eizo's Quick Color Match technology, which facilitates color calibration across devices for consistent results.

Another important technology integrated into these monitors is the Eizo ColorNavigator software, which allows users to create and manage multiple color profiles. This is especially vital for workflows that require precise color fidelity for different devices and mediums. The built-in calibration sensor in both models enables users to perform self-calibrations, ensuring that color accuracy is maintained over time without the need for external equipment.

Furthermore, the ergonomic design of the CG223W and CG243W promotes comfort during long hours of work. They offer adjustable stands that allow for height, tilt, and swivel adjustments. This flexibility helps in creating an optimal viewing position, reducing strain during extended use.

Connectivity options are abundant, with USB hubs and multiple inputs, including DisplayPort and HDMI. This versatility allows users to connect the monitors to various devices quickly and efficiently.

With their blend of advanced technologies, comprehensive color reproduction capabilities, and ergonomic design, the Eizo CG223W and CG243W remain favorites among professionals who demand the highest standards in their visual work.
Top Page Image Contents