Eizo CG243W, CG223W user manual Attaching an Arm, Attach the monitor to the arm or stand

Page 34

Chapter 6 Reference

6-1. Attaching an Arm

The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option.

Attention

•When attaching an arm or stand, follow the instructions of their user’s manual.

•When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard.

-Clearance between the screw holes: 100 mm × 100 mm

-Thickness of plate: 2.6 mm

-Strong enough to support weight of the monitor unit (except the stand) and attachments such as cables.

Use the screws as described below.

-FlexStand: The screws fixing the stand to the monitor

-Height adjustable stand: The screws supplied with this monitor (M4 × 12mm)

•When using an arm or stand, attach it to meet the following tilt angles of the monitor.

-Up 45 degrees, down 45 degrees (horizontal display, and vertical display rotated 90 degrees clockwise)

•Connect the cables after attaching an arm.

•Do not adjust the height of the stand removed from the monitor. When adjusted without attached monitor, it causes the personnel injury or the damaged to the stand.

•Since the monitor and arm are so heavy, dropping them may result in injury or equipment damage.

[Attachment Procedure]

1Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down.

2Remove the stand.

Prepare a screwdriver. Unscrew the four screws securing the unit and the stand with the screwdriver.

3Attach the monitor to the arm or stand.

Secure the monitor to the arm or stand using the screws specified in the user’s manual of the arm or stand.

34 Chapter 6 Reference

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Page Location of Caution Statement Page Cleaning Contents Features IntroductionEx. CG243W Height adjustable stand Controls and FunctionsUtility Disk Disk contents and software overviewTo use ColorNavigator Basic Operation and Functions Displaying Adjustment MenuAdjusting/Setting ExitingShowing Button Guide Functions Adjusting Screen Setting Screen ResolutionWindows XP WindowsWindows Vista Mac OSAdjustment Procedure Perform the auto adjustment Displaying Screen CorrectlyWindows To eliminate vertical bars Clock Remove flickering or blurring PhaseTo correct screen position Hor.Position Ver.Position Adjust the color gradation To adjust color gradation automatically Range AdjustmentTo select the display mode Color Mode Color AdjustmentMode Purpose Adjustment items in each mode To perform advanced adjustmentsColor Mode Icon Function To adjust the contrast Contrast To adjust the brightness BrightnessTo adjust the color temperature Temperature To adjust the hue Hue To adjust the gamma value GammaTo adjust the color saturation Saturation To adjust the black level Black Level To adjust the gain value GainTo enhance the outline of the image Outline Enhancer To adjust six colors 6 Colors To change screen size Screen Size Displaying Lower ResolutionsConfiguring moving image performance Overdrive CG243W Menu FunctionSettings Buttons that can be locked Enabling/Disabling Mode Selection Mode PresetLocking Buttons Key Lock Setting the Eizo Logo Display Logo Setting Orientation OrientationSetting Range of Frequency Signal Bandwidth Setting Language LanguageSelectable languages Restoring the Default Setting To reset color adjustment values Color ResetSignal inputs Standard Setting the Power Saving Power SaveMonitor Power Indicator Setting Power Indicator Power Indicator Message below appears Problems Possible cause and remedy No pictureScreen is too bright or too dark Mode menu does not appear Problems Possible cause and remedy Characters are blurredAdjustment menu does not appear Auto adjust function does not work correctlyCheck whether the USB cable is connected correctly Attaching an Arm Attach the monitor to the arm or standTo switch the input signal Connecting More than Two PCs to the MonitorConnection examples To set input signal selection Input Selection Priority setting FunctionMaking Use of USB Universal Serial Bus Connection Procedure Setup of USB FunctionRequired System Environment Displaying monitor information by pressing Displaying signal information Signal InfoDisplaying Monitor Information Displaying monitor information Monitor InfoSpecifications CG223WCG243W Main default settings factory settings Outside Dimensions CG243W FlexStand Pin No Signal Connector Pin AssignmentPin Signal Contact No Signal RemarksGlossary Range Adjustment Hdcp High-bandwidth Digital Contents ProtectionPhase ResolutionApplicable Frequency Polarity Resolution Preset TimingDot clock Horizontal Vertical Signal MHz KHz For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie 关于电子信息产品污染控制标识 03V22843E1 U.M-CG243W

CG243W, CG223W specifications

The Eizo CG223W and CG243W are part of Eizo's ColorEdge series, designed specifically for creative professionals requiring precision in color reproduction. These monitors are particularly favored by graphic designers, photographers, and video editors.

The CG223W features a 22-inch, wide-gamut IPS panel, while the CG243W offers a larger 24-inch display. Both models are equipped with a maximum resolution of 1920 x 1200 pixels, providing ample screen real estate for detailed work. They boast a contrast ratio of 1000:1 and a brightness level that can reach up to 300 cd/m², ensuring that images are vibrant and details remain sharp, even in moderately lit environments.

One of the standout features of these monitors is their ability to cover a wide color gamut. The CG223W and CG243W can reproduce 99% of the AdobeRGB color space, which is a critical factor for professionals who need to ensure accurate color representation in their projects. This capability is complemented by Eizo's Quick Color Match technology, which facilitates color calibration across devices for consistent results.

Another important technology integrated into these monitors is the Eizo ColorNavigator software, which allows users to create and manage multiple color profiles. This is especially vital for workflows that require precise color fidelity for different devices and mediums. The built-in calibration sensor in both models enables users to perform self-calibrations, ensuring that color accuracy is maintained over time without the need for external equipment.

Furthermore, the ergonomic design of the CG223W and CG243W promotes comfort during long hours of work. They offer adjustable stands that allow for height, tilt, and swivel adjustments. This flexibility helps in creating an optimal viewing position, reducing strain during extended use.

Connectivity options are abundant, with USB hubs and multiple inputs, including DisplayPort and HDMI. This versatility allows users to connect the monitors to various devices quickly and efficiently.

With their blend of advanced technologies, comprehensive color reproduction capabilities, and ergonomic design, the Eizo CG223W and CG243W remain favorites among professionals who demand the highest standards in their visual work.
Top Page Image Contents