Encore electronic ENNUS1 user manual

Page 8

7.Click the button corresponding to your choice of IP setting method (static or dynamic using DHCP). When assigning a static IP address you also have to define Subnet Mask and Default Gateway. If you choose Automatically get IP by DHCP, you can use desired DNS by clicking the Manual DNS button and manually assigning a DNS.

8.Click Submit to save your settings. And the ENNUS1 Server will reboot.

9.You have now finished configuring the IP address.

Image 8

Contents

ENNUS1 Table of Contents Introduction Package Contents Product OverviewProduct CD Physical DescriptionAssigning an IP Address to the ENNUS1 Server Basic InstallationConnecting the Hardware Setting the IP Address Server Names and Server Name RulesPage Page Using the ENNUS1 Server Subnet IssueIntroduction Connect & DisconnectInstallation of USB Device Driver Page Using the ENNUS1 Server Auto-Connect Printer Page Network Scanner Page USB Storage Request to Connect Limitations Installing Control Center Control CenterUsing the Control Center Quitting the Control CenterDisplaying ENNUS1 Server Status Using the ENNUS1 Server’s Web PagesENNUS1 Server’s Web Pages Setting up ENNUS1 Server Configuration „ General ConfigurationPage Page Troubleshooting LED IndicatorsIndicators Behavior Description FirewallClick Maintenance Click Factory Default Restore Factory DefaultsUsing Init Button Default Parameters List TCP/IPUpgrade Firmware Method a Using the ENNUS1 Server’s Web PagesMethod B Using the Init Button and the Tftp Client Click Upload ImageInit Button