Ergotron A515 manual Recommended primary mode

Page 13

A515BACK

15" TFT LCD Color Monitor

Preset Timing Table

NEXT

!If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed.

The recommended setting is a resolution of 1024x768 and a refresh rate of 60Hz.

No.	Resolution	Horizontal Frequency	Refresh rate
1	720 x 400	31.5 KHz	70.1 Hz
2	640 x 480	31.5 KHz	59.9 Hz
3	640 x 480	37.9 KHz	72.8 Hz
4	800 x 600	37.9 KHz	60.3 Hz
5	800 x 600	46.9 KHz	75.0 Hz
6	*1024 x 768	48.4 KHz	60.0 Hz
7	1024 x 768	56.5 KHz	70.1 Hz
8	1024 x 768	60.0 KHz	75.0 Hz

* Recommended primary mode.

9/20

Image 13

Contents A515 Back Next Standards and Recommendations A515BACK Introduction A515 Cleaning and Maintenance Following items should be found in the packaging Packing ListSelecting a suitable location Connecting the monitor A515 USB hub Setting the refresh rate Recommended primary mode User’s Environment 11/20 Adjusting the picture Using the On Screen Display Direct access buttons Color Control OSD Adjustments15/20 Power consumption Reducing power consumptionMode Error message Problem Possible solution Blank screenNot enter power Display doesPower LED is a orange color Problem Possible solution Color defectsSize, position Shape or qualityProblemPossible solution Contacting serviceOrange color Maximum resolution Input signalsPower management Safety and EMC