Ergotron A515 manual Standards and Recommendations

Page 3

BACK

Standards and Recommendations

NEXT

Safety and Radio Interference Approvals

This product is designed in conformity with the following standards or other normative documents :

Safety

: EN 60950 : 1992 + A1, A2, A3, A4, A11

EMC

: EN 55022 : 1998, EN 55024 : 1998

 

EN 61000-3-2

: 1995+A1 : 1998+A2 : 1998

 

EN 61000-3-3

: 1995

to satisfy the basic requirements of Safety and EMC required by following Directives :

EMC Directive 89/336/EEC

Low Voltage Directive 73/23/EEC & 93/68/EEC

Conformity with the above basic requirements is certified by means of the CE marking on the product.

Manufacturer's Disclaimer

All responsibility is declined :

If the product is stored, transported, installed, modified, or used in a way that is different from that described in the documentation.

If the product is used in conditions different from those described in the documentation.

If any repair is carried out by unauthorised personnel.

For any damage caused by normal wear and tear, uncontrollable events and/or connection to devices that are not original.

The manufacturer reserves the right to carry out modifications to the product described in this documentation at any time and without notice.

Image 3
Contents A515 Back Next Standards and Recommendations A515BACK Introduction A515 Cleaning and Maintenance Following items should be found in the packaging Packing ListSelecting a suitable location Connecting the monitor A515 USB hub Setting the refresh rate Recommended primary mode User’s Environment 11/20 Adjusting the picture Using the On Screen Display Direct access buttons Color Control OSD Adjustments15/20 Reducing power consumption Power consumptionMode Display does Problem Possible solution Blank screenError message Not enter powerShape or quality Problem Possible solution Color defectsPower LED is a orange color Size, positionContacting service ProblemPossible solutionOrange color Safety and EMC Input signalsMaximum resolution Power management