Ergotron A515 manual Cleaning and Maintenance

Page 7

A515BACK

15" TFT LCD Color Monitor

Cleaning and Maintenance

NEXT

To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning.

Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air.

Do not wipe the screen with a cloth or sponge that could scratch the surface.

To clean your antistatic screen, use water and a special microfiber screen cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean cloth with water or a mild detergent.

If the instructions above do not help in removing stains, contact an authorized service agent.

3/20

Image 7
Contents A515 Back Next Standards and Recommendations A515BACK Introduction A515 Cleaning and Maintenance Following items should be found in the packaging Packing ListSelecting a suitable location Connecting the monitor A515 USB hub Setting the refresh rate Recommended primary mode User’s Environment 11/20 Adjusting the picture Using the On Screen Display Direct access buttons Color Control OSD Adjustments15/20 Power consumption Reducing power consumptionMode Display does Problem Possible solution Blank screenError message Not enter powerShape or quality Problem Possible solution Color defectsPower LED is a orange color Size, positionProblemPossible solution Contacting serviceOrange color Safety and EMC Input signalsMaximum resolution Power management