Technical Considerations
Technical Considerations
Before you mount the adapter to a fixed location, consider the following:
•Determine optimal placement.
•Collect and document network information as required.
•Ensure the cable length from the Ethernet network source to the powered device does not exceed 100 meters.
Note: The unit is not a repeater and does not amplify the
Ethernet data signal.
Caution: Observe the following requirements when mounting the Enterasys
•Connect the unit to a grounding type AC outlet (100 ‐240 VAC), using the standard power cord or power supply supplied.
•Allow for easy access to disconnect the unit from the AC outlet, if necessary.
•Do not cover the unit or block the airflow with any other objects. Keep the unit away from excessive heat, humidity, vibration and dust.
•Installation must at all times conform to local regulations.
•There are no user serviceable parts inside the adapter. If support is needed, refer to “Getting Help” on page xvii.