Enterasys Networks BL-69108ENT, BL-69551ENT manual Physical/Environmental Specifications, Input

Page 33

Physical/Environmental Specifications

Physical/Environmental Specifications

Table A‐1 provides physical and mechanical specifications for the Single‐Port Power Over Ethernet Adapter.

Table A-1 Physical and Mechanical Specifications

Item

Specification

 

 

Length:

140 mm (5.51 in.)

 

 

Width:

65 mm (2.55 in.)

 

 

Height:

36 mm (1.42 in.)

 

 

Weight:

0.2 Kg (0.44 lb)

 

 

Input:

AC Input Voltage Range

90 to 264VAC

AC Input Voltage Rating

100 to 240VAC

AC Input Current

0.5A(RMS) max. for 90VAC 0.35A(RMS) max. for 240VAC

Leakage Current

0.25mA max. @ 254VAC 60Hz

AC Input Frequency

47‐63Hz

Single-Port Power Over Ethernet Adapter User’s Guide A-3

Image 33
Contents Single-Port Power Over Ethernet Adapter Page Page Regulatory Compliance Information Seguridad del Producto Hazardous Substances Vcci Notice 73/23/EEC ONE-YEAR Limited Warranty Enterasys Networks, Inc Firmware License Agreement Page Page Page Xii Contents Figures About This Guide PurposeWho Should Use This Guide Following conventions are used in this guide Document ConventionsGetting Help Xviii About This Guide Introduction Functions and FeaturesInput Connector Verifying the Kit Contents Installation and ConnectionTechnical Considerations Out Powering UpDetection Sequence Checklist TroubleshootingRBT3K Troubleshooting Checklist Checklist Troubleshooting Regulatory Compliance Standards Hardware SpecificationsOutput Specifications Safety ApprovalsInput Physical/Environmental SpecificationsOutput Isolation Test