Enterasys Networks V2H124-24P manual Figures

Figures

Figure 1-1.	Front and Rear Panels	1-1
Figure 1-2.	Port LEDs	1-3
Figure 1-3.	System LEDs	1-4
Figure 1-4.	Stack Master Button	1-6
Figure 1-5.	Mode Selection	1-6
Figure 1-6.	Optional Stacking Transceiver	1-7
Figure 1-7.	Power Supply Receptacle	1-7
Figure 2-1.	Collapsed Backbone	2-2
Figure 2-2.	Network Aggregation Plan	2-3
Figure 2-3.	Remote Connections with Fiber Cable	2-4
Figure 2-4.	Making VLAN Connections	2-5
Figure 3-1.	RJ-45 Connections	3-2
Figure 3-2.	Attaching the Brackets	3-3
Figure 3-3.	Installing the Switch in a Rack	3-4
Figure 3-4.	Attaching the Adhesive Feet	3-4
Figure 3-5.	Installing an SFP Transceiver	3-5
Figure 3-6.	Installing a Stacking Transceiver	3-6
Figure 3-7.	Connecting Switches in a Stack	3-7
Figure 3-8.	Power Receptacle	3-8
Figure 3-9. Serial Port (DB-9 DTE) Pin-Out		3-8
Figure 4-1.	Making Twisted-Pair Connections	4-2
Figure 4-2.	Network Wiring Connections	4-3
Figure 4-3.	Making Fiber Port Connections	4-4
Figure B-1.	RJ-45 Connector Pin Numbers	B-1
Figure B-2.	Straight-through Wiring	B-2
Figure B-3.	Crossover Wiring	B-3

xvii