Enterasys Networks Mid-Span Power Hub manual Electrical Specifications

Page 27

		Model BL-69524ENT
Electrical Specifications
AC Power Input

	Voltage	90–264 V autoranging (46 Hz–63 Hz)

	Connector	3-pin with ground

	Chassis grounding	yes

	Power supply	single

DC Port Power Output

	Power enabling	IEEE 802.3af

	Power pins	Unused pairs, pins 4,5(+), 7,8(-)

	Maximum power/port	15.6 W

	Maximum power, all ports active	24 ports at 15.6 W each

	Module-to-module isolation	1500 Vrms

	Overload protection	If current reaches 400–450 mA for 300–400
		milliseconds, then the port shuts down.

Mid-Span Power Hub 24-Port User’s Guide A-3

Image 27

Contents Mid-Span Power Hub Port User’s Guide Page Regulatory Compliance Information Industry Canada Notice ONE-YEAR Limited Warranty Enterasys Networks, Inc Firmware License Agreement Page Page Contents Viii About This Guide PurposeWho Should Use This Guide Getting Help Document ConventionsGetting Help Getting Help Xii About This Guide Functions and Features Port IndicatorsIntroduction Port Indicators Introduction Verifying the Kit Installation and ConnectionKit Contents Technical Considerations Configuration for the 24-Port Mid-Span Power HubTypical Configuration for a 24-Port Mid-Span Power Hub Module Bank for the 24-Port Mid-Span Power Hub Powering UpPowering Up Installation and Connection Troubleshooting Checklist Problem Recommended Action TroubleshootingProbably a faulty data link in the load Model BL-69524ENT Hardware SpecificationsRegulatory Compliance Standards Product StandardsPhysical/Mechanical Specifications Electrical Specifications Model BL-69524ENT