Introduction

Functions and Features

The BL-69524ENT, Enterasys Networks’ 24-port Mid-Span Power Hub, supports applications in which AC power is difficult to access, such as VoIP phones, wireless LAN access points, or IP network cameras.

The Enterasys 24-port Mid-Span Power Hub acts as a “patch panel” and adds ~48 VDC to unused (non-data) wires in standard Category 5, 5e, or 6 Ethernet cable. The power unit delivers both data and power over a single standard Ethernet cable.

Main features of the 24-port Mid-Span Power Hub:

•Fully hot-swappable module banks

•Remote power feeding; powered devices receive power over the Ethernet cable

•Centralized power distribution; one powered device can be connected to a single in-line unit

•IEEE 802.3af standard powering scheme

•Acts as a normal patch panel and places ~48 VDC on unused Ethernet pins

•Total power available: 15.6 W per port per IEEE specification

•Automatic power-control circuitry to detect a powered device before providing power

•Fused power surge protection

Port Indicators

Each port has its own LEDs, which display the following:

•Detect/Power Forwarding (blue)

•Power from Chassis (green)

For information on Troubleshooting, refer to Table 3-1on page 3-1.

Mid-Span Power Hub 24-Port User’s Guide 1-1