Enterasys Networks VH-4802 manual Front Panel Components

Page 18

Front Panel

Figure 1-1 shows the front panel of the Enterasys Networks Vertical Horizon VH-4802. Table 1-1 defines the VH-4802 front panel components.

Figure 1-1. VH-4802 Front Panel

Table 1-1. Front Panel Components

 

 

Name

Function

 

 

Power LED

Lights steady green to indicate power is supplied to the

 

switch. Off indicates no power is supplied to the switch.

RDP LED

Lights steady to indicate that a redundant power unit is

 

attached and is in backup or active mode.

Mgmt LED

Lights steady to indicate that the management is in

 

operational mode.

Link LEDs

Yellow indicates a 10 Mbps link; green indicates a 100

 

Mbps link, off indicates no link; and flashing indicates

 

that the port has been manually disabled.

Mode LEDs

The Mode Select button selects the LED display mode.

 

Act: Flashing indicates activity on the port segment.

 

FDX: Lights steady to indicate full-duplex operation.

 

Flow Ctrl: Lights steady to indicate that flow control is

 

enabled for the port.

Module LEDs

Status: Indicates a module is installed in the slot.

 

Activity: Flashing indicates activity on the module.

10Base-T/100Base-TX

Copper ports using RJ-45 port connectors. All the ports

RJ-45 ports

are wired MDI-X.

 

 

4 Product Overview

VH-4802

Image 18
Contents Fast Ethernet Switch User GuidePage 9033630 FCC Notice Warnhinweis Faseroptikanschlüsse Optische Sicherheit Safety Information Wichtige Sicherheitshinweise Germany Enterasys NETWORKS, INC Program License Agreement 9033630 Declaration of Conformity Viii Table of Contents Index Audience PrefacePurpose ConventionsOrganization Other ConventionsProduct Overview DescriptionFeatures Tftp Front Panel Front Panel ComponentsOptional Modules Optional Modules Optional Module ComponentsRear Panel Rear Panel ComponentsSpanning Tree Protocol Feature SummariesIeee 802.1D Bridge Frame Buffering and Frame LatencyConfiguration and Management Interfaces Software DownloadNon-Volatile Parameter Storage Rmon Port MirroringAuto-negotiation BootPFull Duplex Mode LEDsVirtual LANs VLANs Class of ServiceFlow Control Port TrunkingFactory Defaults Factory Default SettingsGvrp Application Examples Client/Server Network Application Client/Server Network ApplicationLocal Backbone Application Local Backbone ApplicationInstallation Inspecting Your ShipmentSite Requirements Mounting the Switch on a Table or Shelf Mounting the Switch in a Rack Mounting the Switch in a RackInstalling an Optional Module into the Switch Installing an Optional Module into the SwitchConnecting a Terminal to the Console Port Console Port Out-of-Band ConnectionsRemote Management via the Console Port In-Band ConnectionsPowering the Switch Connecting the Power CordNetwork Cable Requirements CopperFiber Base-LX Fiber Specifications 10Base-T/100Base-TX Ports100Base-FX/1000Base-SX/LX Fiber Ports Fiber Uplink ModulesAppendix A. Technical Specifications GeneralElectrical Specifications Physical Specifications10Base-T and 100Base-TX Ports Port SpecificationsConsole Port Table A-1. RS-232 Console Port Pin AssignmentsPower Cord Set Requirements MDI/MDI-X Crossover Cable WiringGeneral Requirements Table A-3. Power Cord Set Requirements by Country Country-Specific RequirementsTechnical Specifications VH-4802 Appendix B. Flow Control Flow Control VH-4802 Appendix C. Acronyms & Abbreviations Term DefinitionSnmp Index Index VH-4802 9033520 Index Index VH-4802 Page 150420-102 R01