Enterasys Networks 9E312-12 manual Reset Switch

Page 15

Installing the 9E312-12 Module

The Reset Switch

The reset switch is located on the front panel, under the top plastic tab as shown in Figure 2-3.It serves two functions: resetting the i960 processor and shutting down the module.

•To reset the processor, press the reset switch twice within three seconds.

•To shut down the module, press and hold the switch down for three or more seconds. To restart the module, press and hold the switch down for three or more seconds.

SNMP management may be used to disable the functions of this switch.

Reset Switch

1

Figure 2-3. The Reset Switch

2-4

Image 15

Contents MMAC-Plus9E312-12 Ethernet Switch Module User’s Guide Page Vcci Notice FCC NoticeDOC Notice Contents Contents Introduction Processor FeaturesINB 9E312-12 Module Getting Help Related ManualsInstalling the 9E312-12 Module Installing the 9E312-12 Module Pin PinoutsReset Switch User Accessible Components E312-12 Module DIP Switch location Setting the 9E312-12 Module DIP SwitchNVRAM-2 Front Panel Ports OperationI960 Host Fast Packet SwitchSystem Management Buses System Diagnostic ControllerINB Interface DC/DC ConverterSystem Status Lanview LEDsLED Color State Description Function of the INB Transmit LEDs are listed in Table Function of the Port Transmit LEDs are listed in Table Technical Speciﬁcations SpeciﬁcationsSafety ServicePhysical Environment