Enterasys Networks 9E312-12 manual Function of the INB Transmit LEDs are listed in Table

Page 25

LANVIEW LEDs

The function of the INB Transmit LEDs are listed in Table 4-3.

Table 4-3. INB Transmit LEDs

LED Color	State


Green (Flashing)	Activity, port enabled (Flashing
	to steady on indicates rate.)

Yellow (Flashing)	Port in standby state

Red	Port disabled

Red (Flashing)	FAULT or Error (Flashing to
	steady on indicates rate.)

Off	No activity, port enabled

The function of the Port Receive LEDs are listed in Table 4-4.

Table 4-4. Port Receive LEDs

LED Color	State


Green	Link, no activity, port enabled

Yellow (Flashing)	Link, activity, port enabled,
	(Flashing to steady on indicates
	rate.)

Off	No link, port disabled

Green (Flashing)	Link, port disabled

4-3

Image 25

Contents MMAC-Plus9E312-12 Ethernet Switch Module User’s Guide Page Vcci Notice FCC NoticeDOC Notice Contents Contents Introduction Processor FeaturesINB 9E312-12 Module Getting Help Related ManualsInstalling the 9E312-12 Module Installing the 9E312-12 Module Pin PinoutsReset Switch User Accessible Components E312-12 Module DIP Switch location Setting the 9E312-12 Module DIP SwitchNVRAM-2 Front Panel Ports OperationI960 Host Fast Packet SwitchSystem Management Buses System Diagnostic ControllerINB Interface DC/DC ConverterSystem Status Lanview LEDsLED Color State Description Function of the INB Transmit LEDs are listed in Table Function of the Port Transmit LEDs are listed in Table Technical Speciﬁcations SpeciﬁcationsService SafetyPhysical Environment