Hit SEL to choose the DAYS: item. The following screen is displayed:
PICK SCHEDULE DAYS
Weekdays____________
Weekends
Clear All Days
Pick specific days:
Yes:
No: SMTWTFS
To choose all weekdays (MTWThF) or weekends (Sat/Sun), use UP/DOWN to highlight Weekdays or Weekends respectively and hit SEL.
To clear all days from this schedule, but leave the hours intact (perhaps for future use), highlight Clear All Days and hit SEL.
To schedule only specific days of the week, highlight Pick specific days and hit SEL. The cursor will jump to Sunday of the specific days list. Use UP/DOWN to move specific days back and forth between the YES and NO rows. Use SEL to move across the row. Once in the specific days row, you must move all the way across the row with SEL to return to the previous menu.
Hit BACK to return to the ENTER SCHEDULE DETAIL screen. Use UP/DOWN to highlight the Start time item. Hit SEL to begin entering a start time for this schedule. The hours column will be high- lighted as shown below.
ENTER SCHEDULE DETAIL
For GROUP B
Days: Weekday
Start time: 12:00 AM
End time: 12:00 PM
Clear Schedule
Press BACK when done
Use UP/DOWN to advance the hours column to the correct hourly starting time. Hit SEL to move to the minutes column. Use UP/DOWN to advance the minutes column to the correct minute starting time. Hit SEL to move to the AM/PM column. Use UP/DOWN to select AM or PM for the starting time. Hit SEL to complete entering the start time.
Use UP/DOWN to highlight the item. Follow the same procedure as above to enter the schedule end time.
When the days, start time, and end time have all been entered, hit BACK to return to the MODIFY SCHEDULES screen. The newly entered schedule will now be in the list, as shown in the following example:
MODIFY SCHEDULES FOR
Group A OFFICE LIGHT
Use SEL to edit sch.
Days |
Weekday 09:30A 05:30PP
(empty schedule)
Use UP/DOWN to select empty schedule and repeat the aforementinel steps to enter more schedules for this group if needed. If more than three schedules are entered for a particular group, they will extend to the next page. Use UP/DOWN to scroll the list to select schedules or empty schedule on the next page.
Hit BACK twice to return to the SELECT GROUP screen. Use UP/ DOWN and SEL to choose another group to schedule. Repeat the above steps to enter schedules for each remaining group in turn.
The PRC1000 is now programmed. Hit BACK four times to return to the top level and log out.
EATON CORPORATION | 5 |