Digi MIL-4511H manual

Page 1

MIL-4511H

SNMP Manageable Hub

HUB 24Port 10BaseT with Modular Uplink Ports, SNMP Management Module Installed

 

 

STACK

 

 

 

 

MBUS

 

 

 

PWR

 

IN

OUT

RX

CX

MSYS

 

MODEL MIL•4511 LINK RECEIVE

PARTITION

User’s Guide

This guide includes the following information:

“Micro Modules used with the MIL-4511H:” on page 2 “Description of Hardware” on page 3 “Description of the LEDs” on page 3

“Description of Dip Switches” on page 3 “Installation Procedure” on page 4 “Installation of Micro Modules” on page 4 “Installation of Rack Mount Ears” on page 5 “Installation of the Rubber Feet” on page 5 “Installation of the Interconnect Cable” on page 6 “Cascading Hubs” on page 7

“Assigning an IP Address” on page 7

“Verifying the IP Address is Set Properly” on page 11 “Legal” on page 12

Doc. Number: 75424 Rev. A

Page 1 Page 2
Image 1
Page 1 Page 2
Contents MIL-4511H Micro Modules used with the MIL 4511H MIL 4511H Packag e ContentsDescription of Hardware Description of Dip SwitchesDescription of the LEDs Installation of Micro Modules Installation ProcedureDB 9 Serial Por t MIL4511 Model Installation of the Rubber FeetStacking Multiple Hubs Installation of the Interconnect CableCascading Hubs Por t RedundancyAssigning an IP Address Alpha Setting the IP Address with TelnetArp -s ether alpha 040c80012B Arpbypass set alpha 0x00.0x40.0xc8.0x00.0x01.0x2BSetting the IP Address with Bootp Setting the IP Address with Rarp0040c802abcdalpha Usr/etc/rarpd-a or /etc/rarpd-aHostname of MIL-4511Hht=1ha=hardware addressip=ip address To set the IP Address with Bootp on a HP/UX systemAlphaht=1ha=0040c8010203ip=199.86.12.183 Ping hostname Verifying the IP Address is Set ProperlyAlpha is alive Ping ip-addressLegal Five-Year Limited Warranty
Top Page Image Contents