Cypress CYV15G0101EQ manual AC Electrical Characteristics

CYV15G0101EQ

AC Electrical Characteristics

Parameter		Description	Test Conditions		Min	Typ	Max	Unit
–		Serial Input Data Rate[1]		–	143	–	1485	Mbps
VSDI		Input Voltage Swing	Single-ended, at the transmitter,		500[5]		1200	mV
			HD data rate
VSDI		Input Voltage Swing	Single-ended, at the transmitter,		500[6]		1200	mV
			SD data rate
ΔV	SDO	Output Voltage Swing[1]	Differential	, 50Ω load	450	700	950	mV
				p-p
–		Output Jitter for Various Cable	270 Mbps		–	0.2[1]	–	UI
		Lengths and Data Rates	Belden 1694A: 0-350m
			Canare L-5CFB: 0-350m
			800 mV transmit amplitude
			Equalizer pathological pattern
			1.485 Gbps		–	0.25[1]	–	UI
			Belden 1694A: 0-140m
			Canare L-5CFB: 0-140m
			800 mV transmit amplitude
			Equalizer pathological pattern
			1.485 Gbps		–	0.3[7]	–	UI
			Belden 1694A: 140-200m
			Canare L-5CFB: 140-200m
			800 mV transmit amplitude
			Equalizer pathological pattern
–		Output Rise/Fall Time[3, 4]	20% - 80%, HD data rate		80	120	220	ps
–		Output Rise/Fall Time[3, 4]	20% - 80%, SD data rate		80	120	350	ps
–		Mismatch in Rise/Fall Time[3, 4]		–	–	–	30	ps
–		Duty Cycle Distortion[3, 4]	HD color bar pattern		–	20	–	ps
–		Overshoot[3, 4]		–	–	–	10	%
–		Input Return Loss[3]		–	-15	–	–	dB
–		Input Resistance[3, 4]	Single-ended		–	2.5	–	kΩ
–		Input Capacitance[3, 4]	Single-ended		–	1	–	pF
–		Output Resistance[3, 4]	Single-ended		–	50	–	Ω

Notes

4.Not tested. Guaranteed by design simulations.

5.Based on characterization across temperature and voltage with 140m of Belden 1694A cable, transmitting SMPTE Equalizer Pathological Test Pattern.

6.Based on characterization across temperature and voltage with 350m of Belden 1694A cable, transmitting SMPTE Equalizer Pathological Test Pattern.

7.Based on characterization at TA = 25°C, VCC = 3.3V

Document Number: 001-04184 Rev. *E Page 6 of 10

[+] Feedback