Cypress CYV15G0101EQ manual Maximum Ratings, DC Electrical Characteristics, Operating Range, Vcc

CYV15G0101EQ

Maximum Ratings

Exceeding maximum ratings may shorten the useful life of the device. These user guidelines are not tested.

Storage Temperature	–65°C to +150°C
Ambient Temperature with
Power Applied	–55°C to +125°C
Supply Voltage to Ground Potential	–0.5V to +3.8V
DC Voltage Applied to Outputs
in High Z State	–0.5V to VCC + 0.5V
DC Input Voltage	–0.5V to VCC+0.5V
Electro Static Discharge (ESD) HBM	> 2000 V
(JEDEC EIA/JESD-A114A)
Latch Up Current	> 200 mA

DC Electrical Characteristics

Power Up Requirements

The CYV15G0101EQ contains one power supply. The voltage on any input or IO pin must not exceed the power pin during power up.

Operating Range

Range	Ambient	VCC
	Temperature
Commercial	0°C to +70°C	+3.3V ±5%

Parameter				Description	Test Conditions	Min	Typ	Max	Unit
VCC			Supply Voltage[1]		–	3.135	3.3	3.465	V
PD			Power Consumption[2]		–	125	160	190	mW
I			Supply Current[1]		–	38	48	60	mA
S
VCMOUT			Output Common Mode Voltage[1]		Load = 50Ω	–	VCC –	–	V
							ΔVSDO/2 = 2.9
VCMIN			Input Common Mode Voltage[1]		–	1		1.4	V
			(Bypass = High)
			Input Common Mode Voltage[1]		–	0		2.9	V
			(Bypass = Low)
–			CLI DC Voltage (0m)[1]		–	2.2	2.65	2.95	V
–			CLI DC Voltage (No Signal)[1]		–	1.5	1.9	2.3	V
–			Floating MCLADJ DC Voltage[1]		–		1.3		V
–			MCLADJ Range[3]		–	0.4	0.72	1.02	V
V		CD/MUTE(OH)			Carrier Not Present	2.8	–	–	V
			CD/MUTE Output Voltage[1]
V		CD/MUTE(OL)			Carrier Present	–	–	0.8	V
V					Min to Mute	2.5	–	–	V
			CD/MUTE Input Voltage Required to
	CD/MUTE
			Force Outputs to Mute[1]
V					Max to Activate	–	–	1	V
			CD/MUTE Input Voltage Required to
	CD/MUTE
			Force Active[1]

Notes

1.Production test.

2.Calculated results from production test.

3.Not tested. Based on characterization.

Document Number: 001-04184 Rev. *E Page 5 of 10

[+] Feedback