Cypress CY8C20396 Absolute Maximum Ratings, Operating Temperature, DC Chip-Level Specifications

CY8C20x36/46/66, CY8C20396

Absolute Maximum Ratings

Exceeding maximum ratings may shorten the useful life of the device. User guidelines are not tested.

Table 12. Absolute Maximum Ratings

Symbol	Description	Conditions	Min	Typ	Max	Units
TSTG	Storage Temperature	Higher storage temperatures reduces data	–55	+25	+125	°C
		retention time. Recommended Storage
		Temperature is +25°C ± 25°C. Extended
		duration storage temperatures above 85oC
		degrades reliability.
Vdd	Supply Voltage Relative to Vss		–0.5	–	+6.0	V
VIO	DC Input Voltage		Vss – 0.5	–	Vdd + 0.5	V
VIOZ	DC Voltage Applied to Tri-state		Vss –0.5	–	Vdd + 0.5	V
IMIO	Maximum Current into any Port Pin		–25	–	+50	mA
ESD	Electro Static Discharge Voltage	Human Body Model ESD	2000	–	–	V
LU	Latch up Current	In accordance with JESD78 standard	–	–	200	mA

Operating Temperature

Table 13. Operating Temperature

Symbol	Description	Conditions	Min	Typ	Max	Units
TA	Ambient Temperature		–40	–	+85	°C
TJ	Operational Die Temperature	The temperature rise from ambient to junction
		is package specific. Refer the table Thermal
		Impedances per Package on page 28. The	–40	–	+100	°C
		user must limit the power consumption to
		comply with this requirement.

DC Chip-Level Specifications

The following table lists guaranteed maximum and minimum specifications for the entire voltage and temperature ranges.

Table 14. DC Chip-Level Specifications

Symbol	Description	Conditions	Min	Typ	Max	Units
Vdd	Supply Voltage	Refer the table DC POR and LVD	1.71	–	5.5	V
		Specifications on page 21
IDD24	Supply Current, IMO = 24 MHz	Conditions are Vdd = 3.0V, TA = 25°C,	–	2.88	4.0	mA
		CPU = 24 MHz. CapSense running at 12
		MHz, no IO sourcing current
IDD12	Supply Current, IMO = 12 MHz	Conditions are Vdd = 3.0V, TA = 25°C,	–	1.71	2.6	mA
		CPU = 12 MHz. CapSense running at 12
		MHz, no IO sourcing current
IDD6	Supply Current, IMO = 6 MHz	Conditions are Vdd = 3.0V, TA = 25°C,	–	1.16	1.8	mA
		CPU = 6 MHz. CapSense running at 6 MHz,
		no IO sourcing current
ISB0	Deep Sleep Current	Vdd = 3.0V, TA = 25°C, IO regulator turned off	–	0.1	–	μA
ISB1	Standby Current with POR, LVD and	Vdd = 3.0V, TA = 25°C, IO regulator turned off	–	1.07	1.5	μA
	Sleep Timer

Document Number: 001-12696 Rev. *D Page 17 of 34

[+] Feedback