| point you with to connect. |
Data encryption | Select the data encryption type from |
| |
| identical with the setting of wireless access |
| point you with to connect. |
ASCII / | When the encryption type is ‘WEP’, it’s |
PASSPHRASE | required to input a set of ‘passphrase’ to |
| connect to wireless access point. Check |
| ‘ASCII’ or ‘PASSPHRASE’ depends on the |
| security setting of access point, and input it in |
| the box; if you select ‘PASSPHRASE’ you |
| also need to select the length of the key. |
| The passphrase must be identical with the |
| setting of wireless access point you with to |
| connect. |
Key index | Select WEP key index. For most of access |
| points you can select ‘1’, but please refer to |
| the setting of the access point. |
Network key / | When the encryption type is ‘WPA’ or |
Confirm network key | |
| ‘passphrase’ to connect to wireless access |
| point. Please input the same passphrase in two |
| boxes for confirmation. |
EAP TYPE / | When authentication type is any of 802.1X, |
Tunnel / | you have to select EAP type, tunnel, and |
Provision Mode | provision mode from dropdown menu. This |
| setting must be identical with your 802.1x |
| authentication server. |
Username / Identity / | Please input 802.1x related authentication |
Domain / Password | information here. |
Certificate | If certification is required to authenticate with |
| 802.1x authentication server, please select a |
| local certificate from dropdown list. |
PAC | Check this box and PAC (Privilege Access |
| Certificate) will be automatically selected. |
When all required parameters are set, click ‘OK’ to create and save a new profile.
27