Canton 3C16476CS manual Configuration Overview, Device Summary Information, Device View

Page 27

4	CONFIGURING THE SWITCH

This chapter provides information on how to configure the Switch’s advanced features. Topics include:

■Device Summary Information

■Administration Settings

■Configuring VLANs

■Configuring Port Settings

■QoS VoIP Traffic Settings

■Security

■Monitoring

Configuration Overview

The Switch is shipped ready for use. If you only want the Switch to function as a basic layer 2 switch, you do not need to access the Web interface and configure the Switch.

You only need to access the Web interface if you want to:

■Set the administration password to the Web interface

■Assign an IP address to the Switch

■Configure the Switch’s advanced features

■Upgrade the firmware

Device Summary Information

The Device Summary screen, which automatically loads after you log on to the Web interface, provides a snapshot of the Switch’s basic settings and versions of current components.

Click Device Summary on the menu. A screen appears with three tabs that include:

■Device View

■Polling Interval

■Color Key

Device View

Contains fields that display the system, switch, and management switch information to identify the Switch. The fields include Product Description, System Location, System Contact, Serial Number, Product 3C Number, MAC Address, Software Version, Unit Uptime, Bootroom Version, and Hardware Version.

Image 27

Contents 3C16476CS Baseline Switch 2250 PlusEnd of Life Statement Regulated Materials StatementEnvironmental Statement about the Documentation Contents Safety Information Conventions Icon DescriptionConvention Description Documentation Comments Related DocumentationAutonegotiating 10/100 Mbps Ports Overview of the Baseline Switch 2250 PlusFeatures and Capabilities Autosensing of MDI/MDIX ConnectionsPriority Level SFP PortsTraffic Prioritization Forwarding of Bpdu PacketsPhysical Features Front Panel48 RJ-45 Ports 10/100/1000BASE-T/SFP Ports Link/Activity LEDsStatusMeaning Status Meaning Module Active LEDsPackage Contents Before You Begin Positioning the SwitchAufstellen des Switch Using the Mounting KitRack-Mounting or Free-Standing Inserting the Screws Montagesatz AnweisungenColor State Supplying Power to the SwitchPlacing Units On Top of Each Other Checking for Correct OperationConnecting Devices to the Switch Connecting a Network DeviceUsing SFP Transceivers Approved SFP TransceiversInserting an SFP Transceiver Performing Spot Checks Removing an SFP TransceiverVerify That Installing the Switch Running the Discovery Application Requirements for Accessing the Web InterfaceWelcome screen of Discovery appears Logging On to the Web Interface Navigating the Web InterfaceMenu Menu Item Description Lists the available items on the menuNavigating the Web Interface ButtonsAccessing the Interface Without Using Discovery Dhcp Assigned IP AddressManually Assigned Static IP Address Configuration Overview Device Summary InformationDevice View Color Key Polling IntervalAdministration Settings Modifying the IP Address SettingsAutomatic IP Configuration IP Setup Backup ConfigurationRestore Configuration Initialize Firmware UpgradeReboot System AccessUser Summary Create User Modify UserRemove User Snmp Add SetupSystem Time SummarySnmp Remove Configuring VLANsModify Vlan VlanModify Vlan Screen Modify PortRemove RenameForwarding Tagged/Untagged Frames Port DetailVlan Detail Sample Vlan Configurations Setting Up Two VLANs on the Same SwitchSetting Up Vlan Across Two Switches Spanning Tree Tagged Vlan ConfigurationIgmp Query Igmp SnoopingConfiguring Port Settings AdministrationBroadcast Storm Detail Port Administration Summary ScreenLink Aggregation Speed/Duplex for 1000 Mbps ConnectionsCreate Guidelines for Creating TrunksModify Spanning Tree per PortSpanning Tree Summary Screen Spanning Tree Detail Screen Port MirroringPort Mirroring Screen QoS VoIP Traffic SettingsQoS VoIP Setup Screen Port SetupOUI Modify OUI SummaryConfigure SecurityRadius Client Radius Client Configure Screen 802.1X Settings802.1X Setup Screen Cable Diagnostics MonitoringAddress Table Cable Diagnostic Screen DiagnosticsConfiguring the Switch Forgotten Password Resetting to Factory DefaultsLink/Activity LED is on, but network perfor- mance is poor Solving LED IssuesForgotten Static IP Address Fiber cable is connected, but the Module Active LED is offAll ports appear to show continual activity If the Problem PersistsTroubleshooting Purchase Value-Added Services Troubleshoot Online Access Software DownloadsRegister Your Product Contact Us Telephone Technical Support and RepairCountry Country Telephone NumberUS and Canada Telephone Technical Support and Repair Important Safety Information Safety InformationAppendix B Safety Information Electrical Related StandardsEnvironmental PhysicalAppendix C Technical Information Category 3 cable 1000BASE-TAutonegotiation BandwidthEthernet Category 5e cablesCategory 6 cable ClientLayer Ieee 802.1pIeee 802.3ad IP AddressProtocol SwitchNetwork PingTrunking Traffic monitoringGlossary Index Index Regulatory Notices