Canton 3C16476CS manual Configuring Port Settings, Broadcast Storm, Administration

Page 43

Broadcast Storm

Use the Broadcast Storm page to set the Switch’s broadcast storm control and threshold limits.

A broadcast storm is an incorrect packet sent out on a network that causes most hosts to respond all at once, typically with wrong answers that start the process over again. Broadcast storms use substantial network bandwidth and may cause network time-outs.

The settings include:

■Status – Enables and disables broadcast storm control.

■Packet Rate Threshold – Sets the broadcast storm threshold (64 to 1000000 kilobits per second).

Figure 37 Broadcast Storm Setup Screen

Configuring Port Settings

Using the Web interface, you can configure the speed/duplex, flow control, link aggregation, and port mirroring settings of each port. You can also view the

Configuring Port Settings

43

current connection status of each port or shut down or disable ports.

The Port menu includes five items:

■Administration

■Link Aggregation

■Spanning Tree per Port

■Port Mirroring

■Statistics

Administration

Three tabs are available on the Port Administration page:

■Summary

■Detail

■Setup

Summary

Use the Summary tab to display Port State, Flow Control, Speed, Default VLAN ID, Link Type, or Duplex for all the ports.

Image 43

Contents 3C16476CS Baseline Switch 2250 PlusRegulated Materials Statement End of Life StatementEnvironmental Statement about the Documentation Contents Safety Information Icon Description ConventionsConvention Description Documentation Comments Related DocumentationAutonegotiating 10/100 Mbps Ports Overview of the Baseline Switch 2250 PlusFeatures and Capabilities Autosensing of MDI/MDIX ConnectionsPriority Level SFP PortsTraffic Prioritization Forwarding of Bpdu PacketsFront Panel Physical Features48 RJ-45 Ports Link/Activity LEDs 10/100/1000BASE-T/SFP PortsStatusMeaning Status Meaning Module Active LEDsPackage Contents Before You Begin Positioning the SwitchUsing the Mounting Kit Aufstellen des SwitchRack-Mounting or Free-Standing Inserting the Screws Montagesatz AnweisungenColor State Supplying Power to the SwitchPlacing Units On Top of Each Other Checking for Correct OperationConnecting Devices to the Switch Connecting a Network DeviceApproved SFP Transceivers Using SFP TransceiversInserting an SFP Transceiver Removing an SFP Transceiver Performing Spot ChecksVerify That Installing the Switch Running the Discovery Application Requirements for Accessing the Web InterfaceWelcome screen of Discovery appears Navigating the Web Interface Logging On to the Web InterfaceMenu Menu Item Description Lists the available items on the menuNavigating the Web Interface ButtonsDhcp Assigned IP Address Accessing the Interface Without Using DiscoveryManually Assigned Static IP Address Device Summary Information Configuration OverviewDevice View Color Key Polling IntervalModifying the IP Address Settings Administration SettingsAutomatic IP Configuration Backup Configuration IP SetupRestore Configuration Initialize Firmware UpgradeSystem Access RebootUser Summary Modify User Create UserRemove User Snmp Add SetupSystem Time SummarySnmp Remove Configuring VLANsModify Vlan VlanModify Vlan Screen Modify PortRemove RenamePort Detail Forwarding Tagged/Untagged FramesVlan Detail Setting Up Two VLANs on the Same Switch Sample Vlan ConfigurationsSetting Up Vlan Across Two Switches Spanning Tree Tagged Vlan ConfigurationIgmp Query Igmp SnoopingAdministration Configuring Port SettingsBroadcast Storm Detail Port Administration Summary ScreenLink Aggregation Speed/Duplex for 1000 Mbps ConnectionsCreate Guidelines for Creating TrunksModify Spanning Tree per PortSpanning Tree Summary Screen Spanning Tree Detail Screen Port MirroringPort Mirroring Screen QoS VoIP Traffic SettingsQoS VoIP Setup Screen Port SetupOUI Modify OUI SummarySecurity ConfigureRadius Client Radius Client Configure Screen 802.1X Settings802.1X Setup Screen Monitoring Cable DiagnosticsAddress Table Cable Diagnostic Screen DiagnosticsConfiguring the Switch Forgotten Password Resetting to Factory DefaultsLink/Activity LED is on, but network perfor- mance is poor Solving LED IssuesForgotten Static IP Address Fiber cable is connected, but the Module Active LED is offAll ports appear to show continual activity If the Problem PersistsTroubleshooting Troubleshoot Online Access Software Downloads Purchase Value-Added ServicesRegister Your Product Contact Us Telephone Technical Support and RepairCountry Country Telephone NumberUS and Canada Telephone Technical Support and Repair Important Safety Information Safety InformationAppendix B Safety Information Electrical Related StandardsEnvironmental PhysicalAppendix C Technical Information Category 3 cable 1000BASE-TAutonegotiation BandwidthEthernet Category 5e cablesCategory 6 cable ClientLayer Ieee 802.1pIeee 802.3ad IP AddressProtocol SwitchNetwork PingTrunking Traffic monitoringGlossary Index Index Regulatory Notices