Carrier Access installation manual Hardware Overview, EdgeFLEX 600 Front View

Page 16

EdgeFLEX 600 Overview

Hardware Overview

Hardware Overview

The EdgeFLEX 600 is a carrier-class multiservice telecommunications switch. The EdgeFLEX 600 complies to the building equipment standards published by both Telcordia (NEBS) and the European Telecommunications Standards Institute (ETSI). It is 10.40 inches (6 rack-units, 264.16 mm) in height,

17.26inches (438.4 mm) wide, and 11.81 inches (300 mm) deep with cables, and may be installed in a ETSI-compliant 600mm or 300mm rack or NEBS-style 19- or 23-inch rack.

EdgeFLEX 600 Front View

The following illustration shows the front view of the EdgeFLEX 600 equipped with typical interfaces. The paragraphs following the illustration describe the corresponding features indicated in the illustration.

5

 

 

84/63 IMA / PACKET SERVER

 

84/63 CESoP SERVER

4

1

 

 

T1/E1 MULTISERVICE

3

EdgeFLEX 600

 

2

EdgeFLEX 600

 

1

 

6

Management (MGMT) card provides:

•alarm relay contacts (inputs and outputs)

•system timing inputs and outputs

•management serial ports

•out-of-band management Ethernet ports

•GBIC slots for passive CWDM Mux/Demux or Optical Add/Drop Multiplexor modules

•System Lamp Test button and Alarm Cutoff switch

SCPX - System Controller and Packet Fabric; also provides trunk interfaces (either Gigabit Ethernet or SONET/SDH)

SCPX 2 - slot for second System Controller and Packet Fabric, with trunk interfaces; equipping the EdgeFLEX 600 with two SCPX cards provides for redundant operation.

PODs - hot-swappable interface modules, up to six per EdgeFLEX 600 chassis Dual redundant hot-swappable DC power supply modules

Dual redundant fan trays and an air filter (behind decorative bezel) EdgeFLEX 600

1-2

EdgeFLEX 600 – Release 2.0

Page 15 Page 17
Image 16
Page 15 Page 17
Contents EdgeFLEX Page Safety of Information Technology Equipment ComplianceFCC Requirements, Part Industry Canada ICES-003Europe EN55022 and AS/NZS CISPR22 Nebs Level 3 Requirements Compliance EdgeFLEX 600 Release Safety Notices Class 1 Laser Product Safety WarningDC Power Supply Warnings AC Power Supply Service and Maintenance End UserDC Power Supply Safety Information Electrostatic Discharge ESD Precautions Warranty Limitation of Warranty & Limitation of RemediesWarranty Product Returns Table of Contents Adding and Replacing Components Connector Pin AssignmentsIndex Chapter Hardware Overview EdgeFLEX 600 Front ViewTechnical Specifications Site PlanningCompliance Specifications Environmental SpecificationsRelated Documentation EdgeFLEX 600 Installation Preparing for Installation Required Tools to Unpack and Install the ChassisChecking the Contents Unpacking the EdgeFLEXFan Tray, System Interfaces, and Power Supply Units Power Supply Unit LED LocationsChassis Components Front Panel LEDs and System Interfaces LocationsInstalling the EdgeFLEX 600 Chassis in a Rack Installing Flanges on the ChassisEdgeFLEX 600 Installation Rack Installation Connecting Power Installing the Decorative BezelRequirements for DC Power Connections Connecting Chassis to Ground Wiring and Connecting DC Power Connecting System Cables System Management ConnectorsConnecting the Management Cables System Management ConnectionsConnecting the Local Console Cable Connecting the Timing Input CableConnecting the Timing Output Cable Connecting the Alarm ContactsConnecting Network Cables Selecting the Appropriate Network CablesConnecting to 10/100 Ethernet Interfaces Connecting to DS1/E1 InterfacesConnecting to Optical Interfaces Powering Up the Chassis Powering Up and Checking LEDsCard LED Locations Checking System Status LEDs Check Management Port Ethernet LEDsCard Type LED Label Description Normal State Alarm State Check I/O Card LEDsRouting Cables Routing System and Network CablesAdding and Replacing Components Replacing the Air Filter Replacing a Fan Tray Adding and Replacing Components Replacing an SFP Module Removing/Installing Cards Operating the Ejector Latches Card Removal/InsertionAdding and Replacing Components Nonreplaceable Components Nonreplaceable Components EdgeFLEX 600 Release Appendix a Pin Locations Ethernet RJ-45 Pinout management portTiming Port Pinout Serial Port PinoutTiming In Ports Alarm Inputs Pinout Timing Out PortsAlarm Outputs Pinout Alarm Outputs Pinout EdgeFLEX 600 Release Index Index

600, EdgeFLEX specifications

Carrier Access EdgeFLEX 600 is an advanced solution designed to cater to the growing demands of telecom operators and large enterprises. This versatile platform seamlessly integrates various technologies to provide robust connectivity, enhanced network performance, and operational efficiency. With its cutting-edge features, EdgeFLEX 600 is poised to play a critical role in the evolution of modern communication networks.

One of the standout features of EdgeFLEX 600 is its remarkable scalability. Engineered to support a wide range of applications, the platform can be easily expanded to meet the increasing bandwidth requirements of users. This scalability is particularly crucial for service providers aiming to accommodate the influx of data traffic generated by the rise of IoT devices and high-definition content streaming.

EdgeFLEX 600 is equipped with a powerful multi-service architecture, making it ideal for a variety of deployment scenarios. This architecture allows operators to deliver voice, video, and data services over a single platform, significantly reducing operational costs and simplifying network management. The platform supports various protocols, including Ethernet, MPLS, and SDH, ensuring compatibility with existing infrastructures and facilitating smooth integration.

The user experience is further enhanced by EdgeFLEX 600's advanced Quality of Service (QoS) features. These capabilities enable operators to prioritize critical applications and allocate bandwidth dynamically, ensuring optimal performance under varying network conditions. Furthermore, built-in analytics and monitoring tools provide valuable insights into network performance, enabling proactive troubleshooting and efficient resource management.

Security is also a top priority for EdgeFLEX 600. The platform incorporates robust encryption and authentication protocols to safeguard sensitive data and prevent unauthorized access. This focus on security is essential in an era where cyber threats are increasingly sophisticated and prevalent.

In terms of energy efficiency, EdgeFLEX 600 has been designed with sustainability in mind. Its optimized hardware and software components work together to minimize power consumption, thereby reducing operational costs and the overall environmental footprint of communication networks.

In summary, Carrier Access EdgeFLEX 600 is a cutting-edge solution that addresses the modern challenges faced by telecom operators and enterprises. With its scalable architecture, multi-service capabilities, advanced QoS features, strong security, and energy efficiency, EdgeFLEX 600 is well-equipped to support the next generation of communication networks. As the demand for high-performance connectivity continues to grow, this platform will undoubtedly play a pivotal role in shaping the future of telecommunications.
Top Page Image Contents