Carrier Access EdgeFLEX, 600 installation manual DC Power Supply Warnings

Page 7

Preface

Safety Notices

DC Power Supply Warnings

The DC power supply must be installed in a restricted area, such as an equipment closet or room, in compliance with Articles 110-16, 110-17, and 110-18 of the National Electric Code, ANSI/NFPA 70. The DC power source must be isolated from the AC power source and must have a proper ground.

The grounded conductor of the DC supply circuit can be connected to the frame grounding conductor of the EdgeFLEX 600. In this case, the following conditions apply:

The EdgeFLEX 600 must be connected to the DC power supply grounded conductor or bonding jumper from the grounding terminal bar or bus to which the DC power supply grounded conductor is connected.

The EdgeFLEX 600 must be located in the same area as other equipment having a connection between the grounded conductor of the same DC supply circuit and the grounding conductor, and also the point of grounding of the DC system. The DC system must not be grounded elsewhere.

The DC power supply must be located on the same premises as the EdgeFLEX 600.

You must not switch or disconnect devices in the grounded conductor between the DC power supply and the point of connection of the grounding electrode conductor.

A readily accessible disconnect device may be provided in the fixed wiring for a DC power supply. The device must be rated for the voltage and current specified.

For safety purposes, the DC power supply requires connection to a grounded outlet. To prevent possible injury from voltages on the telecommunications network, disconnect all telecommunications network lines before disconnecting the DC power supply from the grounded outlet.

EdgeFLEX 600 - Release 2.0

vii

Page 6 Page 8
Image 7
Page 6 Page 8
Contents EdgeFLEX Page Industry Canada ICES-003 Safety of Information Technology EquipmentCompliance FCC Requirements, PartEurope EN55022 and AS/NZS CISPR22 Nebs Level 3 Requirements Compliance EdgeFLEX 600 Release Class 1 Laser Product Safety Warning Safety NoticesDC Power Supply Warnings AC Power Supply Service and Maintenance End UserDC Power Supply Safety Information Electrostatic Discharge ESD Precautions Limitation of Warranty & Limitation of Remedies WarrantyWarranty Product Returns Table of Contents Adding and Replacing Components Connector Pin AssignmentsIndex Chapter EdgeFLEX 600 Front View Hardware OverviewSite Planning Technical SpecificationsCompliance Specifications Environmental SpecificationsRelated Documentation EdgeFLEX 600 Installation Unpacking the EdgeFLEX Preparing for InstallationRequired Tools to Unpack and Install the Chassis Checking the ContentsFront Panel LEDs and System Interfaces Locations Fan Tray, System Interfaces, and Power Supply UnitsPower Supply Unit LED Locations Chassis ComponentsInstalling Flanges on the Chassis Installing the EdgeFLEX 600 Chassis in a RackEdgeFLEX 600 Installation Rack Installation Connecting Power Installing the Decorative BezelRequirements for DC Power Connections Connecting Chassis to Ground Wiring and Connecting DC Power System Management Connections Connecting System CablesSystem Management Connectors Connecting the Management CablesConnecting the Alarm Contacts Connecting the Local Console CableConnecting the Timing Input Cable Connecting the Timing Output CableSelecting the Appropriate Network Cables Connecting Network CablesConnecting to DS1/E1 Interfaces Connecting to 10/100 Ethernet InterfacesConnecting to Optical Interfaces Powering Up the Chassis Powering Up and Checking LEDsCard LED Locations Check Management Port Ethernet LEDs Checking System Status LEDsCheck I/O Card LEDs Card Type LED Label Description Normal State Alarm StateRouting System and Network Cables Routing CablesAdding and Replacing Components Replacing the Air Filter Replacing a Fan Tray Adding and Replacing Components Replacing an SFP Module Removing/Installing Cards Card Removal/Insertion Operating the Ejector LatchesAdding and Replacing Components Nonreplaceable Components Nonreplaceable Components EdgeFLEX 600 Release Appendix a Ethernet RJ-45 Pinout management port Pin LocationsTiming Port Pinout Serial Port PinoutTiming In Ports Timing Out Ports Alarm Inputs PinoutAlarm Outputs Pinout Alarm Outputs Pinout EdgeFLEX 600 Release Index Index

600, EdgeFLEX specifications

Carrier Access EdgeFLEX 600 is an advanced solution designed to cater to the growing demands of telecom operators and large enterprises. This versatile platform seamlessly integrates various technologies to provide robust connectivity, enhanced network performance, and operational efficiency. With its cutting-edge features, EdgeFLEX 600 is poised to play a critical role in the evolution of modern communication networks.

One of the standout features of EdgeFLEX 600 is its remarkable scalability. Engineered to support a wide range of applications, the platform can be easily expanded to meet the increasing bandwidth requirements of users. This scalability is particularly crucial for service providers aiming to accommodate the influx of data traffic generated by the rise of IoT devices and high-definition content streaming.

EdgeFLEX 600 is equipped with a powerful multi-service architecture, making it ideal for a variety of deployment scenarios. This architecture allows operators to deliver voice, video, and data services over a single platform, significantly reducing operational costs and simplifying network management. The platform supports various protocols, including Ethernet, MPLS, and SDH, ensuring compatibility with existing infrastructures and facilitating smooth integration.

The user experience is further enhanced by EdgeFLEX 600's advanced Quality of Service (QoS) features. These capabilities enable operators to prioritize critical applications and allocate bandwidth dynamically, ensuring optimal performance under varying network conditions. Furthermore, built-in analytics and monitoring tools provide valuable insights into network performance, enabling proactive troubleshooting and efficient resource management.

Security is also a top priority for EdgeFLEX 600. The platform incorporates robust encryption and authentication protocols to safeguard sensitive data and prevent unauthorized access. This focus on security is essential in an era where cyber threats are increasingly sophisticated and prevalent.

In terms of energy efficiency, EdgeFLEX 600 has been designed with sustainability in mind. Its optimized hardware and software components work together to minimize power consumption, thereby reducing operational costs and the overall environmental footprint of communication networks.

In summary, Carrier Access EdgeFLEX 600 is a cutting-edge solution that addresses the modern challenges faced by telecom operators and enterprises. With its scalable architecture, multi-service capabilities, advanced QoS features, strong security, and energy efficiency, EdgeFLEX 600 is well-equipped to support the next generation of communication networks. As the demand for high-performance connectivity continues to grow, this platform will undoubtedly play a pivotal role in shaping the future of telecommunications.
Top Page Image Contents