Carrier Access EdgeFLEX, 600 installation manual Replacing an SFP Module

Page 41

Adding and Replacing Components

Replacing an SFP Module

4.Unscrew the captive retaining screw at the bottom of the fan tray. Grasp the fan tray removal handle and pull the fan tray out of the chassis, as shown below.

5.Insert a replacement fan tray in the empty slot, aligning it with the internal guides in the chassis. Slide the fan tray assembly into the chassis completely, until it is fully seated, and the front of the handle is flush with the front of the chassis.

6.With a #2 Phillips screwdriver, screw the captive retaining screw by turning it clockwise until it is tight and the fan tray assembly is secure in the chassis.

7.Reinstall the fan tray cover, and tighten the retaining thumbscrews at the top and bottom of the cover.

8.Reinstall the decorative bezel.

Replacing an SFP Module

The EdgeFLEX 600 optical interfaces are field-replaceable and hot swappable, and can be replaced with power applied. To replace a faulty SFP module, perform the following steps:

1.Remove any cabling from the SFP module.

2.Replace the SFP dust plugs to protect the optics. Likewise, replace the dust plugs on the duplex cable connector of the fiber optic cables if the cable will not be reinstalled immediately.

NOTE: Depending on the type of SFP module, steps 2 and 3 may need to be reversed. The bail on some SFP modules cannot be moved with the dust plugs installed.

EdgeFLEX 600 - Release 2.0

3-5

Page 40 Page 42
Image 41
Page 40 Page 42
Contents EdgeFLEX Page Compliance Safety of Information Technology EquipmentFCC Requirements, Part Industry Canada ICES-003Europe EN55022 and AS/NZS CISPR22 Nebs Level 3 Requirements Compliance EdgeFLEX 600 Release Class 1 Laser Product Safety Warning Safety NoticesDC Power Supply Warnings DC Power Supply Service and Maintenance End UserAC Power Supply Safety Information Electrostatic Discharge ESD Precautions Limitation of Warranty & Limitation of Remedies WarrantyWarranty Product Returns Table of Contents Index Connector Pin AssignmentsAdding and Replacing Components Chapter EdgeFLEX 600 Front View Hardware OverviewSite Planning Technical SpecificationsRelated Documentation Environmental SpecificationsCompliance Specifications EdgeFLEX 600 Installation Required Tools to Unpack and Install the Chassis Preparing for InstallationChecking the Contents Unpacking the EdgeFLEXPower Supply Unit LED Locations Fan Tray, System Interfaces, and Power Supply UnitsChassis Components Front Panel LEDs and System Interfaces LocationsInstalling Flanges on the Chassis Installing the EdgeFLEX 600 Chassis in a RackEdgeFLEX 600 Installation Rack Installation Requirements for DC Power Connections Installing the Decorative BezelConnecting Power Connecting Chassis to Ground Wiring and Connecting DC Power System Management Connectors Connecting System CablesConnecting the Management Cables System Management ConnectionsConnecting the Timing Input Cable Connecting the Local Console CableConnecting the Timing Output Cable Connecting the Alarm ContactsSelecting the Appropriate Network Cables Connecting Network CablesConnecting to DS1/E1 Interfaces Connecting to 10/100 Ethernet InterfacesConnecting to Optical Interfaces Card LED Locations Powering Up and Checking LEDsPowering Up the Chassis Check Management Port Ethernet LEDs Checking System Status LEDsCheck I/O Card LEDs Card Type LED Label Description Normal State Alarm StateRouting System and Network Cables Routing CablesAdding and Replacing Components Replacing the Air Filter Replacing a Fan Tray Adding and Replacing Components Replacing an SFP Module Removing/Installing Cards Card Removal/Insertion Operating the Ejector LatchesAdding and Replacing Components Nonreplaceable Components Nonreplaceable Components EdgeFLEX 600 Release Appendix a Ethernet RJ-45 Pinout management port Pin LocationsTiming In Ports Serial Port PinoutTiming Port Pinout Timing Out Ports Alarm Inputs PinoutAlarm Outputs Pinout Alarm Outputs Pinout EdgeFLEX 600 Release Index Index

600, EdgeFLEX specifications

Carrier Access EdgeFLEX 600 is an advanced solution designed to cater to the growing demands of telecom operators and large enterprises. This versatile platform seamlessly integrates various technologies to provide robust connectivity, enhanced network performance, and operational efficiency. With its cutting-edge features, EdgeFLEX 600 is poised to play a critical role in the evolution of modern communication networks.

One of the standout features of EdgeFLEX 600 is its remarkable scalability. Engineered to support a wide range of applications, the platform can be easily expanded to meet the increasing bandwidth requirements of users. This scalability is particularly crucial for service providers aiming to accommodate the influx of data traffic generated by the rise of IoT devices and high-definition content streaming.

EdgeFLEX 600 is equipped with a powerful multi-service architecture, making it ideal for a variety of deployment scenarios. This architecture allows operators to deliver voice, video, and data services over a single platform, significantly reducing operational costs and simplifying network management. The platform supports various protocols, including Ethernet, MPLS, and SDH, ensuring compatibility with existing infrastructures and facilitating smooth integration.

The user experience is further enhanced by EdgeFLEX 600's advanced Quality of Service (QoS) features. These capabilities enable operators to prioritize critical applications and allocate bandwidth dynamically, ensuring optimal performance under varying network conditions. Furthermore, built-in analytics and monitoring tools provide valuable insights into network performance, enabling proactive troubleshooting and efficient resource management.

Security is also a top priority for EdgeFLEX 600. The platform incorporates robust encryption and authentication protocols to safeguard sensitive data and prevent unauthorized access. This focus on security is essential in an era where cyber threats are increasingly sophisticated and prevalent.

In terms of energy efficiency, EdgeFLEX 600 has been designed with sustainability in mind. Its optimized hardware and software components work together to minimize power consumption, thereby reducing operational costs and the overall environmental footprint of communication networks.

In summary, Carrier Access EdgeFLEX 600 is a cutting-edge solution that addresses the modern challenges faced by telecom operators and enterprises. With its scalable architecture, multi-service capabilities, advanced QoS features, strong security, and energy efficiency, EdgeFLEX 600 is well-equipped to support the next generation of communication networks. As the demand for high-performance connectivity continues to grow, this platform will undoubtedly play a pivotal role in shaping the future of telecommunications.
Top Page Image Contents