Carrier Access 600, EdgeFLEX installation manual Removing/Installing Cards

Page 42

Adding and Replacing Components

Removing/Installing Cards

3. Flip down the extractor bail.

4.Grasp the extractor bail and gently but firmly pull to remove the SFP module.

5.Insert the replacement SFP module into the empty slot, and using the extractor bail, gently but firmly push until fully seated.

NOTE: Be sure to replace with the same type of SFP, unless there is no software configuration present for the port in question.

6.Flip the extractor bail to the upright position.

7.Remove the SFP dust plug from the SFP module, and if necessary, remove the dust plugs from the fiber optic cable’s duplex connector.

NOTE: Depending on the type of SFP module, steps 5 and 6 may need to be reversed. The bail on some SFP modules cannot be moved with the dust plug installed.

8. Reconnect the optical cabling to the SFP.

Removing/Installing Cards

The EdgeFLEX 600 cards (SCPX, service modules, Management card, and DC PSUs) are hot-swappable and may be removed or inserted while the unit is fully powered.

NOTE: Blank faceplates covering empty positions in the EdgeFLEX 600 chassis do not have ejector latches, and may be removed simply by unscrewing their two captive thumbscrews.

CAUTION! THE EDGEFLEX 600 IS DESIGNED TO BE OPERATED WITH EITHER A CARD OR BLANK FACEPLATE IN EVERY FRONT-PANEL POSITION. OPERATING THE EDGEFLEX 600 WITH UNCOVERED SLOTS WILL INTERFERE WITH THE AIRFLOW THROUGH THE CHASSIS AND IMPAIR SYSTEM COOLING.

3-6

EdgeFLEX 600 - Release 2.0

Page 41 Page 43
Image 42
Page 41 Page 43
Contents EdgeFLEX Page FCC Requirements, Part Safety of Information Technology EquipmentCompliance Industry Canada ICES-003Europe EN55022 and AS/NZS CISPR22 Nebs Level 3 Requirements Compliance EdgeFLEX 600 Release Safety Notices Class 1 Laser Product Safety WarningDC Power Supply Warnings Service and Maintenance End User AC Power SupplyDC Power Supply Safety Information Electrostatic Discharge ESD Precautions Warranty Limitation of Warranty & Limitation of RemediesWarranty Product Returns Table of Contents Connector Pin Assignments Adding and Replacing ComponentsIndex Chapter Hardware Overview EdgeFLEX 600 Front ViewTechnical Specifications Site PlanningEnvironmental Specifications Compliance SpecificationsRelated Documentation EdgeFLEX 600 Installation Checking the Contents Preparing for InstallationRequired Tools to Unpack and Install the Chassis Unpacking the EdgeFLEXChassis Components Fan Tray, System Interfaces, and Power Supply UnitsPower Supply Unit LED Locations Front Panel LEDs and System Interfaces LocationsInstalling the EdgeFLEX 600 Chassis in a Rack Installing Flanges on the ChassisEdgeFLEX 600 Installation Rack Installation Installing the Decorative Bezel Connecting PowerRequirements for DC Power Connections Connecting Chassis to Ground Wiring and Connecting DC Power Connecting the Management Cables Connecting System CablesSystem Management Connectors System Management ConnectionsConnecting the Timing Output Cable Connecting the Local Console CableConnecting the Timing Input Cable Connecting the Alarm ContactsConnecting Network Cables Selecting the Appropriate Network CablesConnecting to 10/100 Ethernet Interfaces Connecting to DS1/E1 InterfacesConnecting to Optical Interfaces Powering Up and Checking LEDs Powering Up the ChassisCard LED Locations Checking System Status LEDs Check Management Port Ethernet LEDsCard Type LED Label Description Normal State Alarm State Check I/O Card LEDsRouting Cables Routing System and Network CablesAdding and Replacing Components Replacing the Air Filter Replacing a Fan Tray Adding and Replacing Components Replacing an SFP Module Removing/Installing Cards Operating the Ejector Latches Card Removal/InsertionAdding and Replacing Components Nonreplaceable Components Nonreplaceable Components EdgeFLEX 600 Release Appendix a Pin Locations Ethernet RJ-45 Pinout management portSerial Port Pinout Timing Port PinoutTiming In Ports Alarm Inputs Pinout Timing Out PortsAlarm Outputs Pinout Alarm Outputs Pinout EdgeFLEX 600 Release Index Index

600, EdgeFLEX specifications

Carrier Access EdgeFLEX 600 is an advanced solution designed to cater to the growing demands of telecom operators and large enterprises. This versatile platform seamlessly integrates various technologies to provide robust connectivity, enhanced network performance, and operational efficiency. With its cutting-edge features, EdgeFLEX 600 is poised to play a critical role in the evolution of modern communication networks.

One of the standout features of EdgeFLEX 600 is its remarkable scalability. Engineered to support a wide range of applications, the platform can be easily expanded to meet the increasing bandwidth requirements of users. This scalability is particularly crucial for service providers aiming to accommodate the influx of data traffic generated by the rise of IoT devices and high-definition content streaming.

EdgeFLEX 600 is equipped with a powerful multi-service architecture, making it ideal for a variety of deployment scenarios. This architecture allows operators to deliver voice, video, and data services over a single platform, significantly reducing operational costs and simplifying network management. The platform supports various protocols, including Ethernet, MPLS, and SDH, ensuring compatibility with existing infrastructures and facilitating smooth integration.

The user experience is further enhanced by EdgeFLEX 600's advanced Quality of Service (QoS) features. These capabilities enable operators to prioritize critical applications and allocate bandwidth dynamically, ensuring optimal performance under varying network conditions. Furthermore, built-in analytics and monitoring tools provide valuable insights into network performance, enabling proactive troubleshooting and efficient resource management.

Security is also a top priority for EdgeFLEX 600. The platform incorporates robust encryption and authentication protocols to safeguard sensitive data and prevent unauthorized access. This focus on security is essential in an era where cyber threats are increasingly sophisticated and prevalent.

In terms of energy efficiency, EdgeFLEX 600 has been designed with sustainability in mind. Its optimized hardware and software components work together to minimize power consumption, thereby reducing operational costs and the overall environmental footprint of communication networks.

In summary, Carrier Access EdgeFLEX 600 is a cutting-edge solution that addresses the modern challenges faced by telecom operators and enterprises. With its scalable architecture, multi-service capabilities, advanced QoS features, strong security, and energy efficiency, EdgeFLEX 600 is well-equipped to support the next generation of communication networks. As the demand for high-performance connectivity continues to grow, this platform will undoubtedly play a pivotal role in shaping the future of telecommunications.
Top Page Image Contents